Load data for .219 Zipper + .224 | 43gr | Speer TNT Green

.219 Zipper cartridge drawing
Speer logo

Load Specifications

Bullet Manufacturer:Speer
Bullet Weight:43 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.933"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:41,336 psi

Load data in caliber .219 Zipper with .224 | 43gr | Speer TNT Green bullet and 10 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Alliant Reloder-10x and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>82%35,462 psi86%3228 fps99.3%
Alliant AR-Comp<<locked>>94%34,795 psi84%3268 fps97.5%
Alliant Reloder-10x<<locked>>88%36,143 psi87%3255 fps96.5%
Alliant Reloder-7<<locked>>82%37,304 psi90%3222 fps97.3%
Hodgdon TrailBossᴾ<<locked>>100%30,560 psi74%2270 fps100%
IMR 4198<<locked>>86%36,187 psi88%3215 fps97.4%
Norma 200<<locked>>84%35,607 psi86%3225 fps97.1%
ReloadSwiss RS 14ᴾ<<locked>>100%30,226 psi73%2323 fps100%
Vihtavuori N120<<locked>>82%35,694 psi86%3196 fps99.8%
Vihtavuori N130<<locked>>90%37,333 psi90%3205 fps96.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>80%33,301 psi81%3173 fps98.9%
Alliant AR-Comp25 gr90%30,501 psi74%3133 fps95.6%
Alliant Reloder-10x23.3 gr86%33,562 psi81%3182 fps95.6%
Alliant Reloder-7<<locked>>80%34,737 psi84%3153 fps96.5%
Hodgdon TrailBoss<<locked>>80%21,973 psi53%2034 fps100%
IMR 4198<<locked>>82%31,734 psi77%3084 fps95.7%
Norma 200<<locked>>80%31,125 psi75%3097 fps95.5%
ReloadSwiss RS 147.9 gr80%21,857 psi53%2087 fps100%
Vihtavuori N120<<locked>>80%33,518 psi81%3140 fps99.6%
Vihtavuori N130<<locked>>86%32,750 psi79%3084 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 10 powders for .219 Zipper loaded with the .224 | 43gr | Speer TNT Green. Alliant AR-Comp delivers the highest muzzle velocity at 3,268 fps; across all powders the maximum-charge window runs from 2,270 fps to 3,268 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 10 of the 10 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (285 MPa), the top charges use 73–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Alliant Reloder-10x, ReloadSwiss RS 14 rank at the top here: for .219 Zipper with the .224 | 43gr | Speer TNT Green they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data