top of page

Load data for .219 Zipper + .224 | 40gr | Sierra Blitzking

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): ADI AR 2207, Vihtavuori N120

.219 Zipper + .224 | 40gr | Sierra Blitzking

Load Specifications

Bullet:
.224 | 40gr | Sierra Blitzking
Manufacturer SKU:
1440
Bullet Weight:
40gr | 2.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.670" | 17.0mm
Caliber:
.219 Zipper load data
Case Length (l3):
1.933" | 49.1mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.377" | 9.6mm
Shank Seated Depth:
0.377" | 9.6mm
Case Capacity:
34.0 Grains of Water | 2.21 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
41336 psi | 2850 bar
LID:
LID_B5726_C58
Last updated:
2025-01-01

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 26 loads in caliber .219 Zipper with .224 | 40gr | Sierra Blitzking bullet and 13 powders such as ADI AR 2207, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
85%
37086
90%
**40
99%
[Accurate 2015]*
<<locked>>
93%
35926
87%
**81
94%
[Accurate 2495]*
<<locked>>
97%
32198
78%
**68
92%
Alliant AR-Comp
<<locked>>
96%
35810
87%
**40
97%
Alliant Reloder-10x
<<locked>>
90%
36941
89%
**33
96%
[Baschieri & Pellagri 106]*
<<locked>>
86%
36927
89%
**89
93%
Hodgdon TrailBoss
<<locked>>
97%
29109
70%
**90
100%
IMR 4198
<<locked>>
87%
35752
87%
**61
96%
Norma 200
<<locked>>
85%
35868
87%
**91
96%
ReloadSwiss RS 14
<<locked>>
97%
28674
69%
**39
100%
Vihtavuori N120 👍
<<locked>>
86%
36274
88%
**71
99%
Vihtavuori N130
<<locked>>
92%
36709
89%
**45
95%
[Vihtavuori N133]*
<<locked>>
97%
35317
85%
**09
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
33040
80%
**35
98%
[Accurate 2015]*
<<locked>>
86%
28442
69%
**51
90%
[Accurate 2495]*
<<locked>>
93%
28514
69%
**43
90%
[Alliant AR-Comp]*
<<locked>>
86%
25730
62%
**86
90%
[Alliant Reloder-10x]*
<<locked>>
81%
27354
66%
**35
91%
[Baschieri & Pellagri 106]*
<<locked>>
82%
32169
78%
**58
90%
Hodgdon TrailBoss
<<locked>>
80%
22350
54%
**96
100%
[IMR 4198]*
<<locked>>
81%
29718
72%
**71
93%
[Norma 200]*
<<locked>>
81%
30893
75%
**46
94%
ReloadSwiss RS 14
<<locked>>
81%
22118
53%
**46
100%
Vihtavuori N120
<<locked>>
81%
31183
75%
**30
98%
[Vihtavuori N130]*
<<locked>>
82%
27267
66%
**66
90%
[Vihtavuori N133]*
<<locked>>
92%
30385
74%
**58
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page