top of page

Load data for .219 Zipper + .224 | 40gr | Rhino Penetrator

Recommended Powder(s): ADI AR 2207

.219 Zipper + .224 | 40gr | Rhino Penetrator

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 40gr | Rhino Penetrator
Bullet Weight:
40gr | 2.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.632" | 16.1mm
Caliber:
.219 Zipper load data
Case Length (l3):
1.933" | 49.1mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.339" | 8.6mm
Shank Seated Depth:
0.339" | 8.6mm
Case Capacity:
34.0 Grains of Water | 2.21 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
41336 psi | 2850 bar
LID:
LID_B5289_C58
Last updated:
2025-01-01

Load data for 28 loads in caliber .219 Zipper with .224 | 40gr | Rhino Penetrator bullet and 14 powders such as ADI AR 2207. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
84%
36564
88%
**30
99%
Accurate 2015
<<locked>>
93%
36521
88%
**94
95%
[Accurate 2495]*
<<locked>>
97%
32721
79%
**78
93%
Alliant AR-Comp
<<locked>>
97%
36941
89%
**89
97%
Alliant Reloder-10x
<<locked>>
89%
36332
88%
**20
95%
[Baschieri & Pellagri 106]*
<<locked>>
86%
36796
89%
**92
93%
[Hodgdon H322]*
<<locked>>
92%
36535
88%
**01
91%
Hodgdon TrailBoss
<<locked>>
94%
27963
68%
**67
100%
IMR 4198
<<locked>>
87%
36434
88%
**81
96%
Norma 200
<<locked>>
85%
36579
88%
**10
96%
ReloadSwiss RS 14
<<locked>>
94%
27528
67%
**13
100%
Vihtavuori N120
<<locked>>
86%
36318
88%
**81
100%
Vihtavuori N130
<<locked>>
91%
36114
87%
**35
95%
[Vihtavuori N133]*
<<locked>>
97%
35824
87%
**22
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
33837
82%
**61
98%
[Accurate 2015]*
<<locked>>
85%
28079
68%
**38
90%
[Accurate 2495]*
<<locked>>
93%
29066
70%
**73
91%
[Alliant AR-Comp]*
<<locked>>
85%
25657
62%
**92
90%
[Alliant Reloder-10x]*
<<locked>>
81%
27731
67%
**51
91%
[Baschieri & Pellagri 106]*
<<locked>>
82%
32010
77%
**51
90%
[Hodgdon H322]*
<<locked>>
90%
34156
83%
**38
90%
Hodgdon TrailBoss
<<locked>>
81%
22727
55%
**16
100%
[IMR 4198]*
<<locked>>
81%
30385
74%
**00
94%
[Norma 200]*
<<locked>>
81%
31618
76%
**69
94%
ReloadSwiss RS 14
<<locked>>
81%
22394
54%
**59
100%
Vihtavuori N120
<<locked>>
81%
31125
75%
**36
99%
[Vihtavuori N130]*
<<locked>>
81%
26687
65%
**46
90%
[Vihtavuori N133]*
<<locked>>
91%
29907
72%
**48
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page