
Load Specifications
Load data in caliber .219 Zipper with .223 | 45gr | Speer Spitzer Soft Point bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, ReloadSwiss RS 14 and Hodgdon TrailBoss.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2495 | <<locked>> | 98% | 34,940 psi | 85% | 3189 fps | 96% |
| Alliant AR-Comp | <<locked>> | 92% | 34,998 psi | 85% | 3219 fps | 98.1% |
| Alliant Reloder-10x | <<locked>> | 86% | 36,376 psi | 88% | 3196 fps | 97% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,227 psi | 76% | 2231 fps | 100% |
| IMR 4198 | <<locked>> | 84% | 35,998 psi | 87% | 3146 fps | 97.7% |
| Norma 200 | <<locked>> | 82% | 36,187 psi | 88% | 3176 fps | 97.7% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,024 psi | 75% | 2280 fps | 100% |
| Vihtavuori N130 | <<locked>> | 88% | 37,376 psi | 90% | 3146 fps | 97.1% |
| Vihtavuori N135 | <<locked>> | 98% | 36,608 psi | 89% | 3219 fps | 96.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2495 | <<locked>> | 96% | 32,401 psi | 78% | 3120 fps | 95% |
| Alliant AR-Comp | 24 gr | 86% | 29,051 psi | 70% | 3028 fps | 95.5% |
| Alliant Reloder-10x | <<locked>> | 82% | 31,923 psi | 77% | 3074 fps | 95.4% |
| Hodgdon TrailBoss | 7.8 gr | 80% | 23,032 psi | 56% | 2011 fps | 100% |
| IMR 4198 | <<locked>> | 80% | 32,039 psi | 78% | 3031 fps | 96.3% |
| Norma 200 | <<locked>> | 80% | 33,707 psi | 82% | 3107 fps | 96.9% |
| ReloadSwiss RS 14 | 7.9 gr | 80% | 22,597 psi | 55% | 2051 fps | 100% |
| Vihtavuori N130 | <<locked>> | 84% | 32,895 psi | 80% | 3028 fps | 95.5% |
| Vihtavuori N135 | <<locked>> | 96% | 34,113 psi | 83% | 3150 fps | 95.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 9 powders for .219 Zipper loaded with the .223 | 45gr | Speer Spitzer Soft Point. Alliant AR-Comp delivers the highest muzzle velocity at 3,219 fps; across all powders the maximum-charge window runs from 2,231 fps to 3,219 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (285 MPa), the top charges use 75–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .219 Zipper with the .223 | 45gr | Speer Spitzer Soft Point they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.