Load data for .219 Donaldson Wasp + .224 | 50gr | Lapua Naturalis

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 50gr \| Lapua Naturalis
Manufacturer SKU:	NPL5001 \| N566
Bullet Weight:	50gr \| 3.2g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.709" \| 18.0mm
Caliber:	.219 Donaldson Wasp load data
Case Length (l3):	1.810" \| 46.0mm
Cartridge Length (C.O.L.):	2.177" \| 55.3mm
Seated Depth:	0.342" \| 8.7mm
Shank Seated Depth:	0.342" \| 8.7mm
Case Capacity:	35.1 Grains of Water \| 2.28 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40988 psi \| 2826 bar
LID:	LID_B3079_C105
Last updated:	2025-02-02

Load data for 42 loads in caliber .219 Donaldson Wasp with .224 | 50gr | Lapua Naturalis bullet and 21 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	84%	36782	90%	**45	97%
Accurate 2495	<<locked>>	90%	36347	89%	**20	97%
[Accurate 2520]*	<<locked>>	88%	36289	89%	**77	93%
Accurate 4064	<<locked>>	95%	36361	89%	**91	95%
Alliant AR-Comp 👍	<<locked>>	88%	36666	89%	**33	99%
Hodgdon H322	<<locked>>	84%	36129	88%	**61	95%
Hodgdon TrailBoss	<<locked>>	94%	30081	73%	**90	100%
IMR 3031	<<locked>>	92%	35723	87%	**07	96%
[Lovex D073.6]*	<<locked>>	90%	36289	89%	**77	93%
[Norma 202]*	<<locked>>	89%	36027	88%	**48	94%
ReloadSwiss RS 14	<<locked>>	97%	31256	76%	**69	100%
[Rottweil R 901]*	<<locked>>	85%	35592	87%	**02	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	36434	89%	**66	94%
SNPE Vectan Tubal 5000	<<locked>>	93%	36260	88%	**72	95%
[Shooters World Match Rifle]*	<<locked>>	90%	36289	89%	**77	93%
Somchem S335	<<locked>>	87%	36637	89%	**95	95%
Vihtavuori N130	<<locked>>	83%	36158	88%	**92	98%
Vihtavuori N133	<<locked>>	89%	35708	87%	**89	97%
Vihtavuori N135	<<locked>>	96%	33823	83%	**09	96%
Vihtavuori N140	<<locked>>	92%	36883	90%	**48	95%
[Vihtavuori N540]*	<<locked>>	91%	36535	89%	**61	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	81%	33243	81%	**53	96%
[Accurate 2495]*	<<locked>>	81%	27499	67%	**61	93%
[Accurate 2520]*	<<locked>>	84%	31430	77%	**46	90%
[Accurate 4064]*	<<locked>>	86%	27601	67%	**38	90%
Alliant AR-Comp	<<locked>>	81%	28834	70%	**04	97%
[Hodgdon H322]*	<<locked>>	81%	32285	79%	**53	93%
Hodgdon TrailBoss	<<locked>>	82%	24772	60%	**49	100%
[IMR 3031]*	<<locked>>	82%	26353	64%	**99	90%
[Lovex D073.6]*	<<locked>>	86%	31430	77%	**46	90%
[Norma 202]*	<<locked>>	82%	29254	71%	**54	90%
ReloadSwiss RS 14	<<locked>>	81%	24729	60%	**95	100%
[Rottweil R 901]*	<<locked>>	81%	32271	79%	**07	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	81%	30647	75%	**05	91%
[SNPE Vectan Tubal 5000]*	<<locked>>	83%	26745	65%	**90	90%
[Shooters World Match Rifle]*	<<locked>>	86%	31430	77%	**46	90%
[Somchem S335]*	<<locked>>	81%	30052	73%	**05	92%
Vihtavuori N130	<<locked>>	81%	33837	83%	**30	97%
[Vihtavuori N133]*	<<locked>>	81%	28050	68%	**59	93%
[Vihtavuori N135]*	<<locked>>	86%	24903	61%	**13	90%
[Vihtavuori N140]*	<<locked>>	83%	28398	69%	**99	90%
[Vihtavuori N540]*	<<locked>>	85%	30052	73%	**64	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data