Load data for .219 Donaldson Wasp + .224 | 50gr | Hornady SP SX

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 50gr \| Hornady SP SX
Manufacturer SKU:	2240
Bullet Weight:	50gr \| 3.2g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.595" \| 15.1mm
Caliber:	.219 Donaldson Wasp load data
Case Length (l3):	1.810" \| 46.0mm
Cartridge Length (C.O.L.):	2.177" \| 55.3mm
Seated Depth:	0.228" \| 5.8mm
Shank Seated Depth:	0.228" \| 5.8mm
Case Capacity:	35.1 Grains of Water \| 2.28 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40988 psi \| 2826 bar
LID:	LID_B2507_C105
Last updated:	2025-02-02

Load data for 46 loads in caliber .219 Donaldson Wasp with .224 | 50gr | Hornady SP SX bullet and 23 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	84%	35998	88%	**54	98%
Accurate 2495	<<locked>>	90%	36318	89%	**36	97%
[Accurate 2520]*	<<locked>>	89%	36318	89%	**04	93%
Accurate 4064	<<locked>>	95%	35984	88%	**17	95%
Alliant AR-Comp 👍	<<locked>>	89%	36651	89%	**53	99%
[Hodgdon Benchmark]*	<<locked>>	84%	36230	88%	**02	92%
Hodgdon H322	<<locked>>	85%	36434	89%	**00	95%
Hodgdon TrailBoss	<<locked>>	97%	30980	76%	**36	100%
IMR 3031	<<locked>>	93%	36158	88%	**46	96%
[Lovex D073.5]*	<<locked>>	84%	36738	90%	**58	92%
[Lovex D073.6]*	<<locked>>	91%	36840	90%	**10	93%
[Norma 202]*	<<locked>>	89%	36390	89%	**77	94%
ReloadSwiss RS 14	<<locked>>	96%	30777	75%	**78	100%
[Rottweil R 901]*	<<locked>>	85%	35766	87%	**31	94%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	36869	90%	**09	94%
SNPE Vectan Tubal 5000	<<locked>>	94%	36405	89%	**02	96%
[Shooters World Match Rifle]*	<<locked>>	91%	36840	90%	**10	93%
Somchem S335	<<locked>>	88%	36854	90%	**28	96%
Vihtavuori N130	<<locked>>	84%	36811	90%	**31	98%
Vihtavuori N133	<<locked>>	90%	36260	88%	**18	97%
Vihtavuori N135	<<locked>>	97%	34214	83%	**41	96%
Vihtavuori N140	<<locked>>	92%	36564	89%	**58	95%
[Vihtavuori N540]*	<<locked>>	91%	36245	88%	**77	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	81%	32518	79%	**56	96%
[Accurate 2495]*	<<locked>>	81%	26005	63%	**38	93%
[Accurate 2520]*	<<locked>>	84%	30414	74%	**33	90%
[Accurate 4064]*	<<locked>>	87%	27224	66%	**58	90%
Alliant AR-Comp	<<locked>>	81%	28587	70%	**23	97%
[Hodgdon Benchmark]*	<<locked>>	82%	33808	82%	**27	90%
[Hodgdon H322]*	<<locked>>	81%	31734	77%	**59	93%
Hodgdon TrailBoss	<<locked>>	82%	24540	60%	**69	100%
[IMR 3031]*	<<locked>>	82%	25498	62%	**02	90%
[Lovex D073.5]*	<<locked>>	81%	33025	81%	**53	91%
[Lovex D073.6]*	<<locked>>	86%	31053	76%	**59	91%
[Norma 202]*	<<locked>>	82%	28442	69%	**54	90%
ReloadSwiss RS 14	<<locked>>	82%	24410	60%	**11	100%
[Rottweil R 901]*	<<locked>>	81%	31183	76%	**00	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	81%	29994	73%	**12	91%
[SNPE Vectan Tubal 5000]*	<<locked>>	84%	26803	65%	**20	91%
[Shooters World Match Rifle]*	<<locked>>	86%	31053	76%	**59	91%
[Somchem S335]*	<<locked>>	81%	29269	71%	**12	92%
Vihtavuori N130	<<locked>>	81%	33286	81%	**43	97%
[Vihtavuori N133]*	<<locked>>	81%	27630	67%	**72	93%
[Vihtavuori N135]*	<<locked>>	85%	24265	59%	**13	90%
[Vihtavuori N140]*	<<locked>>	83%	27920	68%	**08	90%
[Vihtavuori N540]*	<<locked>>	85%	29617	72%	**81	91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.