Load data for .219 Donaldson Wasp + .224 | 46gr | Peregrine VLR-5

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 46gr \| Peregrine VLR-5
Bullet Weight:	46gr \| 3.0g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.752" \| 19.1mm
Caliber:	.219 Donaldson Wasp load data
Case Length (l3):	1.810" \| 46.0mm
Cartridge Length (C.O.L.):	2.177" \| 55.3mm
Seated Depth:	0.385" \| 9.8mm
Shank Seated Depth:	0.259" \| 6.6mm
Case Capacity:	35.1 Grains of Water \| 2.28 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40988 psi \| 2826 bar
LID:	LID_B8008_C105
Last updated:	2025-02-02
Recommended Twist Rate:	1:10 - 1:9

Load data for 42 loads in caliber .219 Donaldson Wasp with .224 | 46gr | Peregrine VLR-5 bullet and 21 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	83%	36230	88%	**66	94%
Accurate 2015	<<locked>>	89%	36608	89%	**56	97%
Accurate 2495	<<locked>>	94%	35578	87%	**12	96%
Alliant AR-Comp 👍	<<locked>>	92%	36158	88%	**32	99%
Alliant Reloder-10x	<<locked>>	85%	35607	87%	**53	97%
[Hodgdon H322]*	<<locked>>	88%	35578	87%	**56	93%
[Hodgdon H335]*	<<locked>>	84%	36695	90%	**69	93%
Hodgdon TrailBoss	<<locked>>	96%	29950	73%	**82	100%
IMR 3031	<<locked>>	97%	36361	89%	**28	95%
IMR 4198	<<locked>>	83%	35897	88%	**27	98%
[Norma 202]*	<<locked>>	93%	36434	89%	**63	93%
ReloadSwiss RS 14	<<locked>>	96%	29588	72%	**28	100%
[Rottweil R 901]*	<<locked>>	90%	36100	88%	**20	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	90%	36085	88%	**54	92%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	35940	88%	**64	94%
[Somchem S335]*	<<locked>>	91%	35766	87%	**74	94%
Vihtavuori N130	<<locked>>	87%	35679	87%	**87	97%
Vihtavuori N133	<<locked>>	94%	36666	89%	**20	96%
[Vihtavuori N135]*	<<locked>>	96%	29588	72%	**72	92%
[Vihtavuori N140]*	<<locked>>	95%	36303	89%	**33	93%
[Vihtavuori N540]*	<<locked>>	95%	35766	87%	**40	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	33823	83%	**00	93%
[Accurate 2015]*	<<locked>>	81%	28311	69%	**10	93%
[Accurate 2495]*	<<locked>>	84%	24932	61%	**81	90%
[Alliant AR-Comp]*	<<locked>>	81%	25179	61%	**61	93%
Alliant Reloder-10x	<<locked>>	81%	32010	78%	**48	96%
[Hodgdon H322]*	<<locked>>	82%	29733	73%	**69	90%
[Hodgdon H335]*	<<locked>>	81%	33141	81%	**68	91%
Hodgdon TrailBoss	<<locked>>	81%	23337	57%	**05	100%
[IMR 3031]*	<<locked>>	89%	28326	69%	**72	90%
IMR 4198	<<locked>>	81%	33475	82%	**51	97%
[Norma 202]*	<<locked>>	89%	31589	77%	**31	90%
ReloadSwiss RS 14	<<locked>>	81%	23119	56%	**47	100%
[Rottweil R 901]*	<<locked>>	86%	32518	79%	**18	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	32242	79%	**49	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	91%	29994	73%	**90	91%
[Somchem S335]*	<<locked>>	84%	28964	71%	**74	90%
[Vihtavuori N130]*	<<locked>>	81%	29747	73%	**20	94%
[Vihtavuori N133]*	<<locked>>	82%	25599	62%	**79	90%
[Vihtavuori N135]*	<<locked>>	93%	26542	65%	**71	90%
[Vihtavuori N140]*	<<locked>>	91%	31575	77%	**95	91%
[Vihtavuori N540]*	<<locked>>	92%	32445	79%	**41	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data