Load data for .219 Donaldson Wasp + .224 | 45gr | AERO SB,- smax:9.00

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 45gr \| AERO SB,- smax:9.00
Bullet Weight:	45gr \| 2.9g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.728" \| 18.5mm
Caliber:	.219 Donaldson Wasp load data
Case Length (l3):	1.810" \| 46.0mm
Cartridge Length (C.O.L.):	2.177" \| 55.3mm
Seated Depth:	0.361" \| 9.2mm
Shank Seated Depth:	0.361" \| 9.2mm
Case Capacity:	35.1 Grains of Water \| 2.28 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40988 psi \| 2826 bar
LID:	LID_B7_C105
Last updated:	2025-02-02

Load data for 46 loads in caliber .219 Donaldson Wasp with .224 | 45gr | AERO SB,- smax:9.00 bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	84%	35911	88%	**86	93%
Accurate 2015	<<locked>>	90%	36666	89%	**86	96%
Accurate 2495	<<locked>>	96%	36129	88%	**64	96%
Alliant AR-Comp	<<locked>>	93%	35737	87%	**48	98%
Alliant Reloder-10x	<<locked>>	87%	36651	89%	**15	97%
[Hodgdon H322]*	<<locked>>	90%	36550	89%	**09	94%
[Hodgdon H335]*	<<locked>>	85%	36434	89%	**92	92%
Hodgdon TrailBoss	<<locked>>	96%	29327	72%	**98	100%
[IMR 3031]*	<<locked>>	96%	33997	83%	**96	94%
IMR 4198	<<locked>>	85%	36405	89%	**69	98%
Norma 200	<<locked>>	83%	36666	89%	**02	98%
[Norma 202]*	<<locked>>	94%	35969	88%	**79	92%
ReloadSwiss RS 14	<<locked>>	96%	28935	71%	**41	100%
[Rottweil R 901]*	<<locked>>	91%	35940	88%	**56	92%
[SNPE Vectan SP 10]*	<<locked>>	84%	36535	89%	**96	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	91%	35650	87%	**74	92%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	34301	84%	**41	93%
[Somchem S335]*	<<locked>>	93%	36724	90%	**27	94%
Vihtavuori N120	<<locked>>	83%	36680	89%	**56	100%
Vihtavuori N130	<<locked>>	88%	35940	88%	**33	97%
Vihtavuori N133	<<locked>>	94%	35534	87%	**17	95%
[Vihtavuori N140]*	<<locked>>	96%	35868	87%	**50	93%
[Vihtavuori N540]*	<<locked>>	97%	36724	90%	**89	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	32184	79%	**84	91%
[Accurate 2015]*	<<locked>>	81%	26977	66%	**04	92%
[Accurate 2495]*	<<locked>>	86%	25063	61%	**20	90%
[Alliant AR-Comp]*	<<locked>>	81%	23873	58%	**31	92%
Alliant Reloder-10x	<<locked>>	81%	30211	74%	**28	95%
[Hodgdon H322]*	<<locked>>	84%	30545	75%	**28	90%
[Hodgdon H335]*	<<locked>>	82%	32793	80%	**84	90%
Hodgdon TrailBoss	<<locked>>	80%	22771	56%	**18	100%
[IMR 3031]*	<<locked>>	92%	29356	72%	**48	91%
IMR 4198	<<locked>>	81%	32605	80%	**58	97%
Norma 200	<<locked>>	81%	34069	83%	**40	97%
[Norma 202]*	<<locked>>	91%	32155	78%	**77	90%
ReloadSwiss RS 14	<<locked>>	80%	22466	55%	**64	100%
[Rottweil R 901]*	<<locked>>	88%	32300	79%	**54	90%
[SNPE Vectan SP 10]*	<<locked>>	81%	32808	80%	**91	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	89%	32996	81%	**05	91%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	29747	73%	**10	90%
[Somchem S335]*	<<locked>>	86%	29631	72%	**30	90%
Vihtavuori N120	<<locked>>	81%	33895	83%	**91	100%
[Vihtavuori N130]*	<<locked>>	81%	28993	71%	**23	94%
[Vihtavuori N133]*	<<locked>>	84%	25788	63%	**15	90%
[Vihtavuori N140]*	<<locked>>	92%	31227	76%	**12	90%
[Vihtavuori N540]*	<<locked>>	94%	33054	81%	**84	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data