Load data for .219 Donaldson Wasp + .224 | 44gr | Reichenberg Spezial Jagd

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 44gr \| Reichenberg Spezial Jagd
Bullet Weight:	44gr \| 2.9g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.592" \| 15.0mm
Caliber:	.219 Donaldson Wasp load data
Case Length (l3):	1.810" \| 46.0mm
Cartridge Length (C.O.L.):	2.177" \| 55.3mm
Seated Depth:	0.225" \| 5.7mm
Shank Seated Depth:	0.146" \| 3.7mm
Case Capacity:	35.1 Grains of Water \| 2.28 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40988 psi \| 2826 bar
LID:	LID_B10102_C105
Last updated:	2025-02-02
Recommended Twist Rate:	1:14 - 1:12

Load data for 40 loads in caliber .219 Donaldson Wasp with .224 | 44gr | Reichenberg Spezial Jagd bullet and 20 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	88%	36492	89%	**22	96%
Accurate 2495	<<locked>>	93%	36158	88%	**97	96%
[Accurate 4064]*	<<locked>>	97%	33315	81%	**82	92%
Alliant AR-Comp 👍	<<locked>>	91%	36405	89%	**07	99%
Alliant Reloder-10x	<<locked>>	84%	36405	89%	**45	97%
[Hodgdon H322]*	<<locked>>	87%	36071	88%	**32	94%
Hodgdon TrailBoss	<<locked>>	96%	30052	73%	**54	100%
IMR 3031	<<locked>>	96%	36477	89%	**97	95%
IMR 4198	<<locked>>	83%	36811	90%	**19	98%
[Norma 202]*	<<locked>>	92%	36666	89%	**32	93%
ReloadSwiss RS 14	<<locked>>	96%	29718	73%	**00	100%
[Rottweil R 901]*	<<locked>>	89%	36361	89%	**92	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	90%	36564	89%	**40	92%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	35911	88%	**27	94%
[Somchem S335]*	<<locked>>	90%	36318	89%	**53	94%
Vihtavuori N130	<<locked>>	86%	36492	89%	**76	97%
Vihtavuori N133	<<locked>>	92%	35723	87%	**59	96%
[Vihtavuori N135]*	<<locked>>	97%	31212	76%	**91	93%
[Vihtavuori N140]*	<<locked>>	94%	36405	89%	**99	93%
[Vihtavuori N540]*	<<locked>>	94%	35853	87%	**99	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate 2015]*	<<locked>>	81%	29515	72%	**15	93%
[Accurate 2495]*	<<locked>>	83%	24903	61%	**40	90%
[Accurate 4064]*	<<locked>>	93%	29936	73%	**84	90%
[Alliant AR-Comp]*	<<locked>>	81%	25686	63%	**40	93%
Alliant Reloder-10x	<<locked>>	81%	32808	80%	**46	96%
[Hodgdon H322]*	<<locked>>	82%	30487	74%	**61	91%
Hodgdon TrailBoss	<<locked>>	81%	23699	58%	**77	100%
[IMR 3031]*	<<locked>>	89%	28863	70%	**54	90%
IMR 4198	<<locked>>	81%	34345	84%	**50	97%
[Norma 202]*	<<locked>>	88%	31923	78%	**94	90%
ReloadSwiss RS 14	<<locked>>	81%	23554	57%	**23	100%
[Rottweil R 901]*	<<locked>>	85%	32634	80%	**87	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	85%	31792	78%	**02	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	90%	29515	72%	**33	90%
[Somchem S335]*	<<locked>>	84%	29689	72%	**59	90%
Vihtavuori N130	<<locked>>	81%	30676	75%	**12	95%
[Vihtavuori N133]*	<<locked>>	82%	26411	64%	**61	91%
[Vihtavuori N135]*	<<locked>>	92%	27122	66%	**49	91%
[Vihtavuori N140]*	<<locked>>	89%	30966	76%	**31	90%
[Vihtavuori N540]*	<<locked>>	91%	32547	79%	**04	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data