top of page

Load data for .219 Donaldson Wasp + .224 | 40gr | Hornady V-MAX

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.219 Donaldson Wasp + .224 | 40gr | Hornady V-MAX

Load Specifications

Bullet:
.224 | 40gr | Hornady V-MAX
Manufacturer SKU:
22241
Bullet Weight:
40gr | 2.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.689" | 17.5mm
Caliber:
.219 Donaldson Wasp
Case Length (l3):
1.810" | 46.0mm
Cartridge Length (C.O.L.):
2.177" | 55.3mm
Seated Depth:
0.322" | 8.2mm
Shank Seated Depth:
0.262" | 6.7mm
Case Capacity:
35.1 Grains of Water | 2.28 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
40988 psi | 2826 bar
LID:
LID_B2502_C105

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .219 Donaldson Wasp with .224 | 40gr | Hornady V-MAX bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 2015
<<locked>>
91%
36419
89%
**14
95%
Accurate 2495
<<locked>>
97%
35723
87%
**89
95%
Alliant AR-Comp
<<locked>>
94%
35911
88%
**79
97%
Alliant Reloder-10x
<<locked>>
88%
36361
89%
**50
96%
[Baschieri & Pellagri 106]*
<<locked>>
84%
35708
87%
**89
93%
Hodgdon TrailBoss
<<locked>>
96%
29196
71%
**23
100%
IMR 4198
<<locked>>
86%
36405
89%
**10
97%
Norma 200
<<locked>>
84%
36492
89%
**33
97%
ReloadSwiss RS 14
<<locked>>
96%
28819
70%
**69
100%
[Somchem S335]*
<<locked>>
94%
36260
88%
**35
92%
Vihtavuori N120
<<locked>>
84%
36579
89%
**10
100%
Vihtavuori N130
<<locked>>
89%
36071
88%
**61
96%
[Vihtavuori N133]*
<<locked>>
96%
36593
89%
**68
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 2015]*
<<locked>>
82%
27238
66%
**31
90%
[Accurate 2495]*
<<locked>>
91%
28210
69%
**53
91%
[Alliant AR-Comp]*
<<locked>>
83%
25237
62%
**99
91%
[Alliant Reloder-10x]*
<<locked>>
81%
29022
71%
**20
92%
[Baschieri & Pellagri 106]*
<<locked>>
81%
32474
79%
**97
91%
Hodgdon TrailBoss
<<locked>>
81%
22829
56%
**39
100%
IMR 4198
<<locked>>
81%
31604
77%
**59
95%
Norma 200
<<locked>>
81%
32880
80%
**38
96%
ReloadSwiss RS 14
<<locked>>
81%
22597
55%
**85
100%
[Somchem S335]*
<<locked>>
91%
32677
80%
**46
90%
Vihtavuori N120
<<locked>>
81%
32547
79%
**02
99%
[Vihtavuori N130]*
<<locked>>
81%
27876
68%
**12
92%
[Vihtavuori N133]*
<<locked>>
88%
28645
70%
**25
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page