top of page

Load data for .219 Donaldson Wasp + .224 | 35gr | IBEX TRD

Recommended Powder(s):

.219 Donaldson Wasp + .224 | 35gr | IBEX TRD

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 35gr | IBEX TRD
Manufacturer SKU:
T9013
Bullet Weight:
35gr | 2.3g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
<<locked>>
Caliber:
.219 Donaldson Wasp load data
Case Length (l3):
1.810" | 46.0mm
Cartridge Length (C.O.L.):
<<locked>>
Seated Depth:
<<locked>>
Shank Seated Depth:
<<locked>>
Case Capacity:
35.1 Grains of Water | 2.28 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
40988 psi | 2826 bar
LID:
LID_B7000_C105
Last updated:
2026-03-30
Recommended Twist Rate:
1:14 - 1:11

Load data for 26 loads in caliber .219 Donaldson Wasp with .224 | 35gr | IBEX TRD bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
84%
35810
87%
**14
98%
[Accurate 2015]*
<<locked>>
94%
36274
88%
**84
94%
Alliant AR-Comp
<<locked>>
97%
35766
87%
**30
96%
Alliant Reloder-10x
<<locked>>
91%
36521
89%
**27
95%
Alliant Reloder-7
<<locked>>
83%
36390
89%
**58
95%
[Baschieri & Pellagri 106]*
<<locked>>
86%
36550
89%
**66
92%
Hodgdon TrailBoss
<<locked>>
96%
28094
69%
**70
100%
IMR 4198
<<locked>>
88%
36042
88%
**71
96%
Norma 200
<<locked>>
86%
35868
88%
**91
96%
ReloadSwiss RS 14
<<locked>>
96%
27427
67%
**13
100%
Vihtavuori N120
<<locked>>
86%
35723
87%
**71
99%
[Vihtavuori N130]*
<<locked>>
92%
36216
88%
**32
94%
[Vihtavuori N133]*
<<locked>>
97%
34403
84%
**69
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
32010
78%
**06
97%
[Accurate 2015]*
<<locked>>
87%
29080
71%
**58
90%
[Alliant AR-Comp]*
<<locked>>
88%
26992
66%
**28
91%
[Alliant Reloder-10x]*
<<locked>>
83%
28282
69%
**68
91%
[Alliant Reloder-7]*
<<locked>>
81%
33707
82%
**89
94%
[Baschieri & Pellagri 106]*
<<locked>>
84%
33083
81%
**58
90%
Hodgdon TrailBoss
<<locked>>
81%
21944
54%
**83
100%
[IMR 4198]*
<<locked>>
81%
29225
71%
**51
92%
[Norma 200]*
<<locked>>
81%
29820
73%
**07
93%
ReloadSwiss RS 14
<<locked>>
81%
21553
53%
**29
100%
Vihtavuori N120
<<locked>>
81%
29689
72%
**97
98%
[Vihtavuori N130]*
<<locked>>
84%
28181
69%
**92
90%
[Vihtavuori N133]*
<<locked>>
93%
31024
76%
**58
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page