top of page

Load data for .218 Bee + .224 | 73gr | Hornady ELD-Match

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.218 Bee + .224 | 73gr | Hornady ELD-Match

Load Specifications

Bullet:
.224 | 73gr | Hornady ELD-Match
Manufacturer SKU:
22774
Bullet Weight:
73gr | 4.7g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
1.020" | 25.9mm
Caliber:
.218 Bee
Case Length (l3):
1.345" | 34.2mm
Cartridge Length (C.O.L.):
1.655" | 42.0mm
Seated Depth:
0.710" | 18.0mm
Shank Seated Depth:
0.530" | 13.5mm
Case Capacity:
18.0 Grains of Water | 1.17 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B2525_C53

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .218 Bee with .224 | 73gr | Hornady ELD-Match bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
89%
41336
89%
**05
99%
ADI AR 2207
<<locked>>
97%
30182
65%
**82
95%
Accurate 5744
<<locked>>
87%
41234
89%
**73
95%
Accurate No. 11 FS
<<locked>>
88%
41771
90%
**80
98%
IMR 4227
<<locked>>
96%
39668
85%
**47
96%
Lovex D060
<<locked>>
89%
41234
89%
**73
95%
Lovex D063
<<locked>>
85%
40495
87%
**57
95%
Lovex S053
<<locked>>
96%
37362
81%
**34
99%
ReloadSwiss RS 36
<<locked>>
96%
37449
81%
**60
96%
SNPE Vectan BA6 1/2
<<locked>>
96%
34853
75%
**13
100%
Shooters World Blackout
<<locked>>
85%
40495
87%
**57
95%
Shooters World Buffalo Rifle
<<locked>>
89%
41234
89%
**73
95%
Vihtavuori N110
<<locked>>
93%
40640
88%
**54
100%
Vihtavuori N120
<<locked>>
96%
27905
60%
**03
95%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
32880
71%
**70
98%
[ADI AR 2207]*
<<locked>>
86%
22104
48%
**78
90%
[Accurate 5744]*
<<locked>>
81%
34360
74%
**52
92%
Accurate No. 11 FS
<<locked>>
80%
33098
71%
**46
96%
[IMR 4227]*
<<locked>>
81%
25976
56%
**85
91%
[Lovex D060]*
<<locked>>
81%
32808
71%
**23
92%
[Lovex D063]*
<<locked>>
81%
34969
75%
**69
93%
Lovex S053
<<locked>>
81%
24381
53%
**81
95%
[ReloadSwiss RS 36]*
<<locked>>
82%
25208
54%
**08
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
23714
51%
**13
100%
[Shooters World Blackout]*
<<locked>>
81%
34969
75%
**69
93%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
32808
71%
**23
92%
Vihtavuori N110
<<locked>>
80%
28660
62%
**60
100%
[Vihtavuori N120]*
<<locked>>
84%
20508
44%
**06
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page