top of page

Load data for .218 Bee + .224 | 55gr | Sierra SP Blitz

Recommended Powder(s):

.218 Bee + .224 | 55gr | Sierra SP Blitz

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 55gr | Sierra SP Blitz
Manufacturer SKU:
1345
Bullet Weight:
55gr | 3.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.722" | 18.3mm
Caliber:
.218 Bee load data
Case Length (l3):
1.345" | 34.2mm
Cartridge Length (C.O.L.):
1.655" | 42.0mm
Seated Depth:
0.412" | 10.5mm
Shank Seated Depth:
0.412" | 10.5mm
Case Capacity:
18.0 Grains of Water | 1.17 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B5744_C53
Last updated:
2025-01-01

Load data for 30 loads in caliber .218 Bee with .224 | 55gr | Sierra SP Blitz bullet and 15 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
90%
41307
89%
**25
98%
[ADI AR 2207]*
<<locked>>
97%
28979
62%
**46
92%
[Accurate 5744]*
<<locked>>
88%
41684
90%
**07
93%
Accurate No. 11 FS
<<locked>>
89%
41756
90%
**10
97%
Hodgdon LilGun
<<locked>>
85%
40814
88%
**89
100%
[IMR 4227]*
<<locked>>
96%
38696
83%
**48
94%
[Lovex D060]*
<<locked>>
90%
41684
90%
**07
93%
[Lovex D063]*
<<locked>>
87%
41089
89%
**87
93%
Lovex S053
<<locked>>
97%
36854
79%
**48
98%
[ReloadSwiss RS 36]*
<<locked>>
97%
36941
80%
**64
93%
SNPE Vectan BA6 1/2
<<locked>>
97%
34737
75%
**26
100%
[Shooters World Blackout]*
<<locked>>
87%
41089
89%
**87
93%
[Shooters World Buffalo Rifle]*
<<locked>>
90%
41684
90%
**07
93%
Vihtavuori N110 👍
<<locked>>
94%
40524
87%
**93
100%
[Vihtavuori N120]*
<<locked>>
96%
27427
59%
**67
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
31850
69%
**41
96%
[ADI AR 2207]*
<<locked>>
93%
26049
56%
**60
90%
[Accurate 5744]*
<<locked>>
82%
34650
75%
**59
90%
[Accurate No. 11 FS]*
<<locked>>
80%
31792
69%
**16
94%
Hodgdon LilGun
<<locked>>
81%
36114
78%
**10
100%
[IMR 4227]*
<<locked>>
87%
29617
64%
**47
90%
[Lovex D060]*
<<locked>>
84%
34650
75%
**59
90%
[Lovex D063]*
<<locked>>
82%
35099
76%
**65
90%
[Lovex S053]*
<<locked>>
81%
23235
50%
**13
92%
[ReloadSwiss RS 36]*
<<locked>>
89%
29631
64%
**00
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
22307
48%
**41
99%
[Shooters World Blackout]*
<<locked>>
82%
35099
76%
**65
90%
[Shooters World Buffalo Rifle]*
<<locked>>
84%
34650
75%
**59
90%
Vihtavuori N110
<<locked>>
81%
27847
60%
**41
99%
[Vihtavuori N120]*
<<locked>>
91%
23583
51%
**52
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page