top of page

Load data for .218 Bee + .224 | 55gr | Remington PSP

Recommended Powder(s): Vihtavuori N110

.218 Bee + .224 | 55gr | Remington PSP

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 55gr | Remington PSP
Bullet Weight:
55gr | 3.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.695" | 17.7mm
Caliber:
.218 Bee load data
Case Length (l3):
1.345" | 34.2mm
Cartridge Length (C.O.L.):
1.655" | 42.0mm
Seated Depth:
0.385" | 9.8mm
Shank Seated Depth:
0.385" | 9.8mm
Case Capacity:
18.0 Grains of Water | 1.17 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B5131_C53
Last updated:
2025-02-02

Load data for 30 loads in caliber .218 Bee with .224 | 55gr | Remington PSP bullet and 15 powders such as Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
89%
41379
89%
**38
99%
[ADI AR 2207]*
<<locked>>
96%
29167
63%
**62
92%
[Accurate 5744]*
<<locked>>
88%
41756
90%
**23
93%
Accurate No. 11 FS
<<locked>>
88%
41713
90%
**26
97%
Hodgdon LilGun
<<locked>>
84%
40988
88%
**02
100%
IMR 4227
<<locked>>
97%
40509
87%
**97
95%
[Lovex D060]*
<<locked>>
90%
41756
90%
**23
93%
[Lovex D063]*
<<locked>>
86%
40756
88%
**93
93%
Lovex S053
<<locked>>
96%
36985
80%
**61
98%
[ReloadSwiss RS 36]*
<<locked>>
96%
36825
79%
**74
94%
SNPE Vectan BA6 1/2
<<locked>>
96%
34795
75%
**39
100%
[Shooters World Blackout]*
<<locked>>
86%
40756
88%
**93
93%
[Shooters World Buffalo Rifle]*
<<locked>>
90%
41756
90%
**23
93%
Vihtavuori N110 👍
<<locked>>
93%
40596
87%
**07
100%
[Vihtavuori N120]*
<<locked>>
96%
27427
59%
**77
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
31879
69%
**51
96%
[ADI AR 2207]*
<<locked>>
92%
26281
57%
**77
91%
[Accurate 5744]*
<<locked>>
82%
34882
75%
**79
91%
Accurate No. 11 FS
<<locked>>
81%
33547
72%
**65
95%
Hodgdon LilGun
<<locked>>
81%
36666
79%
**26
100%
[IMR 4227]*
<<locked>>
85%
28587
62%
**34
90%
[Lovex D060]*
<<locked>>
82%
33576
72%
**52
90%
[Lovex D063]*
<<locked>>
82%
35201
76%
**82
91%
[Lovex S053]*
<<locked>>
80%
23395
50%
**29
92%
[ReloadSwiss RS 36]*
<<locked>>
89%
29689
64%
**13
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
22916
49%
**64
99%
[Shooters World Blackout]*
<<locked>>
82%
35201
76%
**82
91%
[Shooters World Buffalo Rifle]*
<<locked>>
82%
33576
72%
**52
90%
Vihtavuori N110
<<locked>>
81%
28398
61%
**64
99%
[Vihtavuori N120]*
<<locked>>
91%
23844
51%
**72
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page