top of page

Load data for .218 Bee + .224 | 55gr | Norma FMJ

Recommended Powder(s):

.218 Bee + .224 | 55gr | Norma FMJ

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 55gr | Norma FMJ
Manufacturer SKU:
65708
Bullet Weight:
55gr | 3.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.712" | 18.1mm
Caliber:
.218 Bee load data
Case Length (l3):
1.345" | 34.2mm
Cartridge Length (C.O.L.):
1.655" | 42.0mm
Seated Depth:
0.402" | 10.2mm
Shank Seated Depth:
0.402" | 10.2mm
Case Capacity:
18.0 Grains of Water | 1.17 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B3819_C53
Last updated:
2025-01-01

Load data for 30 loads in caliber .218 Bee with .224 | 55gr | Norma FMJ bullet and 15 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
89%
40654
88%
**21
98%
[ADI AR 2207]*
<<locked>>
96%
28645
62%
**39
92%
[Accurate 5744]*
<<locked>>
88%
41046
88%
**03
93%
Accurate No. 11 FS
<<locked>>
88%
41321
89%
**07
97%
Hodgdon LilGun
<<locked>>
84%
40364
87%
**85
100%
IMR 4227
<<locked>>
97%
39827
86%
**77
95%
[Lovex D060]*
<<locked>>
90%
41046
88%
**03
93%
[Lovex D063]*
<<locked>>
86%
40364
87%
**77
93%
Lovex S053
<<locked>>
96%
36506
79%
**44
98%
[ReloadSwiss RS 36]*
<<locked>>
96%
36521
79%
**61
93%
SNPE Vectan BA6 1/2
<<locked>>
96%
34185
74%
**20
100%
[Shooters World Blackout]*
<<locked>>
86%
40364
87%
**77
93%
[Shooters World Buffalo Rifle]*
<<locked>>
90%
41046
88%
**03
93%
Vihtavuori N110 👍
<<locked>>
94%
41684
90%
**16
100%
[Vihtavuori N120]*
<<locked>>
97%
28036
60%
**87
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
80%
31328
67%
**34
96%
[ADI AR 2207]*
<<locked>>
93%
26687
58%
**83
91%
[Accurate 5744]*
<<locked>>
81%
34113
74%
**56
90%
[Accurate No. 11 FS]*
<<locked>>
81%
32851
71%
**43
94%
Hodgdon LilGun
<<locked>>
81%
35723
77%
**03
100%
[IMR 4227]*
<<locked>>
86%
29109
63%
**41
90%
[Lovex D060]*
<<locked>>
83%
34113
74%
**56
90%
[Lovex D063]*
<<locked>>
81%
34534
74%
**59
90%
[Lovex S053]*
<<locked>>
81%
23844
51%
**36
92%
[ReloadSwiss RS 36]*
<<locked>>
88%
29312
63%
**97
90%
SNPE Vectan BA6 1/2
<<locked>>
82%
23134
50%
**67
99%
[Shooters World Blackout]*
<<locked>>
81%
34534
74%
**59
90%
[Shooters World Buffalo Rifle]*
<<locked>>
83%
34113
74%
**56
90%
Vihtavuori N110
<<locked>>
80%
27572
59%
**38
99%
[Vihtavuori N120]*
<<locked>>
90%
23496
51%
**49
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page