top of page

Load data for .218 Bee + .224 | 52gr | Speer Boat Tail Hollow Point

Recommended Powder(s): Vihtavuori N110

.218 Bee + .224 | 52gr | Speer Boat Tail Hollow Point

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 52gr | Speer Boat Tail Hollow Point
Manufacturer SKU:
1036
Bullet Weight:
52gr | 3.4g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.720" | 18.3mm
Caliber:
.218 Bee load data
Case Length (l3):
1.345" | 34.2mm
Cartridge Length (C.O.L.):
1.655" | 42.0mm
Seated Depth:
0.410" | 10.4mm
Shank Seated Depth:
0.324" | 8.2mm
Case Capacity:
18.0 Grains of Water | 1.17 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B6059_C53
Last updated:
2025-01-01
Recommended Twist Rate:
1:12 - 1:10

Load data for 28 loads in caliber .218 Bee with .224 | 52gr | Speer Boat Tail Hollow Point bullet and 14 powders such as Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
91%
40915
88%
**84
98%
[Accurate 5744]*
<<locked>>
89%
41263
89%
**62
92%
Accurate No. 11 FS
<<locked>>
89%
41002
88%
**69
96%
Hodgdon LilGun
<<locked>>
87%
41713
90%
**80
100%
[IMR 4227]*
<<locked>>
97%
38493
83%
**03
93%
[Lovex D060]*
<<locked>>
91%
41263
89%
**62
92%
[Lovex D063]*
<<locked>>
87%
40219
87%
**33
91%
Lovex S040
<<locked>>
83%
40785
88%
**03
100%
Lovex S053
<<locked>>
96%
34853
75%
**77
96%
[ReloadSwiss RS 36]*
<<locked>>
96%
34925
75%
**84
92%
SNPE Vectan BA6 1/2
<<locked>>
96%
32692
70%
**59
100%
[Shooters World Blackout]*
<<locked>>
87%
40219
87%
**33
91%
[Shooters World Buffalo Rifle]*
<<locked>>
91%
41263
89%
**62
92%
Vihtavuori N110 👍
<<locked>>
96%
41539
90%
**85
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
30197
65%
**64
95%
[Accurate 5744]*
<<locked>>
85%
37057
80%
**74
90%
[Accurate No. 11 FS]*
<<locked>>
81%
31633
68%
**72
93%
Hodgdon LilGun
<<locked>>
81%
34098
73%
**39
100%
[IMR 4227]*
<<locked>>
90%
31676
68%
**59
90%
[Lovex D060]*
<<locked>>
87%
37057
80%
**74
90%
[Lovex D063]*
<<locked>>
85%
37376
81%
**77
90%
Lovex S040
<<locked>>
81%
37521
81%
**44
100%
[Lovex S053]*
<<locked>>
82%
22960
49%
**59
91%
[ReloadSwiss RS 36]*
<<locked>>
94%
32372
70%
**25
90%
SNPE Vectan BA6 1/2
<<locked>>
80%
21350
46%
**67
98%
[Shooters World Blackout]*
<<locked>>
85%
37376
81%
**77
90%
[Shooters World Buffalo Rifle]*
<<locked>>
87%
37057
80%
**74
90%
Vihtavuori N110
<<locked>>
81%
26295
57%
**70
98%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page