top of page

Load data for .218 Bee + .224 | 52gr | Sierra HPBT MatchKing

Recommended Powder(s): Vihtavuori N110

.218 Bee + .224 | 52gr | Sierra HPBT MatchKing

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 52gr | Sierra HPBT MatchKing
Manufacturer SKU:
1410
Bullet Weight:
52gr | 3.4g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
<<locked>>
Caliber:
.218 Bee load data
Case Length (l3):
1.345" | 34.2mm
Cartridge Length (C.O.L.):
<<locked>>
Seated Depth:
<<locked>>
Shank Seated Depth:
<<locked>>
Case Capacity:
18.0 Grains of Water | 1.17 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B5736_C53
Last updated:
2025-01-01
Recommended Twist Rate:
1:12 - 1:10

Load data for 0 loads in caliber .218 Bee with .224 | 52gr | Sierra HPBT MatchKing bullet and 0 powders such as Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
91%
41220
89%
**93
98%
[Accurate 5744]*
<<locked>>
89%
41568
90%
**75
92%
Accurate No. 11 FS
<<locked>>
89%
41278
89%
**72
96%
Hodgdon LilGun
<<locked>>
86%
41031
88%
**74
100%
[IMR 4227]*
<<locked>>
97%
38769
84%
**16
93%
[Lovex D060]*
<<locked>>
91%
41568
90%
**75
92%
[Lovex D063]*
<<locked>>
88%
41640
90%
**59
92%
Lovex S053
<<locked>>
97%
35737
77%
**97
97%
[ReloadSwiss RS 36]*
<<locked>>
97%
35940
77%
**10
92%
SNPE Vectan BA6 1/2
<<locked>>
97%
33054
71%
**69
100%
[Shooters World Blackout]*
<<locked>>
88%
41640
90%
**59
92%
[Shooters World Buffalo Rifle]*
<<locked>>
91%
41568
90%
**75
92%
Vihtavuori N110 👍
<<locked>>
96%
41220
89%
**85
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
31053
67%
**87
95%
[Accurate 5744]*
<<locked>>
85%
36825
79%
**74
90%
[Accurate No. 11 FS]*
<<locked>>
81%
31154
67%
**65
93%
Hodgdon LilGun
<<locked>>
81%
34867
75%
**66
100%
[IMR 4227]*
<<locked>>
90%
31227
67%
**52
90%
[Lovex D060]*
<<locked>>
87%
36825
79%
**74
90%
[Lovex D063]*
<<locked>>
84%
36318
78%
**57
90%
[Lovex S053]*
<<locked>>
81%
22626
49%
**52
91%
[ReloadSwiss RS 36]*
<<locked>>
92%
31386
68%
**08
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
22031
47%
**93
98%
[Shooters World Blackout]*
<<locked>>
84%
36318
78%
**57
90%
[Shooters World Buffalo Rifle]*
<<locked>>
87%
36825
79%
**74
90%
Vihtavuori N110
<<locked>>
81%
27166
59%
**93
99%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page