top of page

Load data for .218 Bee + .224 | 50gr | Lapua Naturalis

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.218 Bee + .224 | 50gr | Lapua Naturalis

Load Specifications

Bullet:
.224 | 50gr | Lapua Naturalis
Manufacturer SKU:
NPL5001 | N566
Bullet Weight:
50gr | 3.2g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.709" | 18.0mm
Caliber:
.218 Bee
Case Length (l3):
1.345" | 34.2mm
Cartridge Length (C.O.L.):
1.655" | 42.0mm
Seated Depth:
0.399" | 10.1mm
Shank Seated Depth:
0.399" | 10.1mm
Case Capacity:
18.0 Grains of Water | 1.17 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B3079_C53

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 26 loads in caliber .218 Bee with .224 | 50gr | Lapua Naturalis bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
90%
41002
88%
**20
97%
[Accurate 5744]*
<<locked>>
89%
41321
89%
**98
91%
Accurate No. 11 FS
<<locked>>
89%
40959
88%
**02
95%
Hodgdon LilGun
<<locked>>
86%
41553
90%
**20
100%
[IMR 4227]*
<<locked>>
96%
38609
83%
**39
92%
[Lovex D060]*
<<locked>>
91%
41321
89%
**98
91%
[Lovex D063]*
<<locked>>
88%
41698
90%
**95
91%
Lovex S053
<<locked>>
96%
35157
76%
**10
96%
[ReloadSwiss RS 36]*
<<locked>>
97%
36579
79%
**49
92%
SNPE Vectan BA6 1/2
<<locked>>
96%
32938
71%
**98
100%
[Shooters World Blackout]*
<<locked>>
88%
41698
90%
**95
91%
[Shooters World Buffalo Rifle]*
<<locked>>
91%
41321
89%
**98
91%
Vihtavuori N110 👍
<<locked>>
94%
40379
87%
**02
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
82%
31850
69%
**33
95%
[Accurate 5744]*
<<locked>>
86%
38508
83%
**39
90%
[Accurate No. 11 FS]*
<<locked>>
81%
31952
69%
**05
92%
Hodgdon LilGun
<<locked>>
82%
35650
77%
**12
100%
[IMR 4227]*
<<locked>>
91%
33083
71%
**21
90%
[Lovex D060]*
<<locked>>
88%
38508
83%
**39
90%
[Lovex D063]*
<<locked>>
86%
38870
84%
**33
90%
[Lovex S053]*
<<locked>>
81%
23641
51%
**01
90%
[ReloadSwiss RS 36]*
<<locked>>
94%
34287
74%
**93
91%
SNPE Vectan BA6 1/2
<<locked>>
81%
22771
49%
**36
98%
[Shooters World Blackout]*
<<locked>>
86%
38870
84%
**33
90%
[Shooters World Buffalo Rifle]*
<<locked>>
88%
38508
83%
**39
90%
Vihtavuori N110
<<locked>>
82%
28050
60%
**39
98%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page