Load data for .218 Bee + .224 | 46gr | RWS TMS

.218 Bee cartridge drawing
RWS logo

Load Specifications

Bullet Manufacturer:RWS
Bullet Weight:46 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.345"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:18 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:46,412 psi

Load data in caliber .218 Bee with .224 | 46gr | RWS TMS bullet and 8 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N110, ADI AR 2205 and SNPE Vectan BA6 1/2.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI AR 2205<<locked>>92%41,408 psi89%2703 fps97.6%
Hodgdon LilGun<<locked>>86%39,958 psi86%2877 fps100%
Hodgdon TrailBossᴾ<<locked>>100%25,193 psi54%1759 fps100%
Lovex S040<<locked>>84%40,176 psi87%2713 fps99.8%
Lovex S053ᴾ<<locked>>100%37,623 psi81%2743 fps96.8%
ReloadSwiss RS 14ᴾ<<locked>>100%24,337 psi52%1798 fps100%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%35,650 psi77%2621 fps100%
Vihtavuori N110<<locked>>96%40,538 psi87%2782 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI AR 220511.4 gr84%33,185 psi72%2530 fps95.3%
Hodgdon LilGun<<locked>>80%32,213 psi69%2720 fps99.7%
Hodgdon TrailBoss<<locked>>80%17,956 psi39%1565 fps100%
Lovex S040<<locked>>80%35,737 psi77%2621 fps99.4%
Lovex S053<<locked>>94%32,198 psi69%2621 fps95.1%
ReloadSwiss RS 14<<locked>>80%17,535 psi38%1604 fps100%
SNPE Vectan BA6 1/29.3 gr80%20,639 psi44%2221 fps97.3%
Vihtavuori N1109.7 gr80%24,961 psi54%2418 fps97.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 8 powders for .218 Bee loaded with the .224 | 46gr | RWS TMS. Hodgdon LilGun delivers the highest muzzle velocity at 2,877 fps; across all powders the maximum-charge window runs from 1,759 fps to 2,877 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 8 of the 8 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 52–89 %, leaving at least 11 % headroom. Hodgdon TrailBoss, Lovex S053, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N110, ADI AR 2205, SNPE Vectan BA6 1/2 rank at the top here: for .218 Bee with the .224 | 46gr | RWS TMS they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data