Load Specifications
Load data in caliber .218 Bee with .224 | 40gr | Rhino Penetrator bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon LilGun, Lovex S040 and Vihtavuori N110.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Hodgdon LilGun | <<locked>> | 92% | 40,263 psi | 87% | 3058 fps | 99.8% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 23,467 psi | 51% | 1841 fps | 100% |
| Lovex S040 | <<locked>> | 90% | 41,974 psi | 90% | 2904 fps | 99.2% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 22,524 psi | 49% | 1880 fps | 100% |
| SNPE Vectan BA6 1/2ᴾ | <<locked>> | 100% | 30,356 psi | 65% | 2657 fps | 99% |
| Vihtavuori N110ᴾ | <<locked>> | 100% | 38,537 psi | 83% | 2907 fps | 99.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Hodgdon LilGun | 11.3 gr | 80% | 26,426 psi | 57% | 2720 fps | 96.9% |
| Hodgdon TrailBoss | <<locked>> | 80% | 17,071 psi | 37% | 1654 fps | 100% |
| Lovex S040 | 9.7 gr | 80% | 31,314 psi | 67% | 2661 fps | 96.8% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 15,969 psi | 34% | 1670 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 86% | 21,016 psi | 45% | 2362 fps | 95.2% |
| Vihtavuori N110 | 10 gr | 86% | 25,121 psi | 54% | 2569 fps | 95.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 6 powders for .218 Bee loaded with the .224 | 40gr | Rhino Penetrator. Hodgdon LilGun delivers the highest muzzle velocity at 3,058 fps; across all powders the maximum-charge window runs from 1,841 fps to 3,058 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 6 of the 6 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (320 MPa), the top charges use 49–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14, SNPE Vectan BA6 1/2 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon LilGun, Lovex S040, Vihtavuori N110 rank at the top here: for .218 Bee with the .224 | 40gr | Rhino Penetrator they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.