
Load Specifications
Load data in caliber .218 Bee with .224 | 40gr | Nosler CT Ballistic Silvertip bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon LilGun, Lovex S040 and Vihtavuori N110.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Hodgdon LilGun | <<locked>> | 94% | 41,481 psi | 89% | 3058 fps | 99.8% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 22,931 psi | 49% | 1811 fps | 100% |
| Lovex S040 | <<locked>> | 90% | 40,901 psi | 88% | 2854 fps | 98.7% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 22,060 psi | 48% | 1854 fps | 100% |
| SNPE Vectan BA6 1/2ᴾ | <<locked>> | 100% | 28,848 psi | 62% | 2595 fps | 98.4% |
| Vihtavuori N110ᴾ | <<locked>> | 100% | 36,608 psi | 79% | 2844 fps | 98.8% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Hodgdon LilGun | 10.9 gr | 80% | 25,570 psi | 55% | 2671 fps | 96.1% |
| Hodgdon TrailBoss | <<locked>> | 80% | 16,462 psi | 35% | 1617 fps | 100% |
| Lovex S040 | 9.3 gr | 80% | 30,110 psi | 65% | 2605 fps | 96% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 15,969 psi | 34% | 1657 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 90% | 22,713 psi | 49% | 2405 fps | 95.8% |
| Vihtavuori N110 | 9.9 gr | 88% | 26,005 psi | 56% | 2575 fps | 95.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 6 powders for .218 Bee loaded with the .224 | 40gr | Nosler CT Ballistic Silvertip. Hodgdon LilGun delivers the highest muzzle velocity at 3,058 fps; across all powders the maximum-charge window runs from 1,811 fps to 3,058 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 6 of the 6 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (320 MPa), the top charges use 48–89 %, leaving at least 11 % headroom. The 40.0 gr projectile in 0.224" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, SNPE Vectan BA6 1/2 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon LilGun, Lovex S040, Vihtavuori N110 rank at the top here: for .218 Bee with the .224 | 40gr | Nosler CT Ballistic Silvertip they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.