top of page

Load data for .218 Bee + .223 | 52gr | SUS-TAC HP

Recommended Powder(s): Vihtavuori N110

.218 Bee + .223 | 52gr | SUS-TAC HP

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.223 | 52gr | SUS-TAC HP
Manufacturer SKU:
H12922
Bullet Weight:
52gr | 3.4g
Bullet Diameter:
0.223" | 5.66mm
Bullet Length:
0.788" | 20.0mm
Caliber:
.218 Bee load data
Case Length (l3):
1.345" | 34.2mm
Cartridge Length (C.O.L.):
1.655" | 42.0mm
Seated Depth:
0.478" | 12.1mm
Shank Seated Depth:
0.339" | 8.6mm
Case Capacity:
18.0 Grains of Water | 1.17 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B10301_C53
Last updated:
2025-01-01
Recommended Twist Rate:
1:10 - 1:8

Load data for 26 loads in caliber .218 Bee with .223 | 52gr | SUS-TAC HP bullet and 13 powders such as Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 19.7 fps

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
91%
40654
88%
**57
97%
[Accurate 5744]*
<<locked>>
90%
40915
88%
**33
91%
Accurate No. 11 FS
<<locked>>
90%
40944
88%
**39
96%
Hodgdon LilGun
<<locked>>
87%
40669
88%
**48
100%
[IMR 4227]*
<<locked>>
96%
36303
78%
**41
92%
[Lovex D060]*
<<locked>>
92%
40915
88%
**33
91%
[Lovex D063]*
<<locked>>
89%
41684
90%
**33
91%
Lovex S040
<<locked>>
85%
41452
89%
**97
100%
Lovex S053
<<locked>>
97%
34200
74%
**38
96%
SNPE Vectan BA6 1/2
<<locked>>
97%
32198
69%
**29
100%
[Shooters World Blackout]*
<<locked>>
89%
41684
90%
**33
91%
[Shooters World Buffalo Rifle]*
<<locked>>
92%
40915
88%
**33
91%
Vihtavuori N110 👍
<<locked>>
97%
40756
88%
**56
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
81%
29762
64%
**28
94%
[Accurate 5744]*
<<locked>>
87%
37985
82%
**74
90%
[Accurate No. 11 FS]*
<<locked>>
81%
29631
64%
**06
91%
Hodgdon LilGun
<<locked>>
81%
32880
71%
**03
100%
[IMR 4227]*
<<locked>>
92%
32372
70%
**52
90%
[Lovex D060]*
<<locked>>
89%
37985
82%
**74
90%
[Lovex D063]*
<<locked>>
87%
38421
83%
**70
90%
Lovex S040
<<locked>>
81%
36622
79%
**08
100%
[Lovex S053]*
<<locked>>
83%
23061
50%
**49
90%
SNPE Vectan BA6 1/2
<<locked>>
82%
21393
46%
**54
98%
[Shooters World Blackout]*
<<locked>>
87%
38421
83%
**70
90%
[Shooters World Buffalo Rifle]*
<<locked>>
89%
37985
82%
**74
90%
Vihtavuori N110
<<locked>>
81%
25309
55%
**24
98%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page