Load data for .218 Bee + .223 | 45gr | Merlin Virtus

.218 Bee cartridge drawing
Virtus logo

Load Specifications

Bullet Manufacturer:Virtus
Bullet Weight:45 gr
Bullet Diameter:0.223"
Bullet Length:<<locked>>
Case Length (l3):1.345"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:18 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:11.5

Load data in caliber .218 Bee with .223 | 45gr | Merlin Virtus bullet and 7 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon LilGun, Lovex S040 and Vihtavuori N110.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI AR 2205<<locked>>96%41,800 psi90%2687 fps96.6%
Hodgdon LilGun<<locked>>90%38,870 psi84%2854 fps100%
Hodgdon TrailBossᴾ<<locked>>100%23,366 psi50%1716 fps100%
Lovex S040<<locked>>88%40,364 psi87%2703 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%22,408 psi48%1755 fps100%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%30,690 psi66%2513 fps99.6%
Vihtavuori N110ᴾ<<locked>>100%39,552 psi85%2759 fps99.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI AR 2205<<locked>>92%36,970 psi80%2595 fps95.3%
Hodgdon LilGun10.8 gr80%26,760 psi58%2582 fps98.1%
Hodgdon TrailBoss<<locked>>80%16,592 psi36%1529 fps100%
Lovex S0409.3 gr80%31,923 psi69%2523 fps98%
ReloadSwiss RS 14<<locked>>80%16,056 psi35%1568 fps100%
SNPE Vectan BA6 1/2<<locked>>82%19,102 psi41%2162 fps95.3%
Vihtavuori N1109.2 gr82%22,989 psi50%2359 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 7 powders for .218 Bee loaded with the .223 | 45gr | Merlin Virtus. Hodgdon LilGun delivers the highest muzzle velocity at 2,854 fps; across all powders the maximum-charge window runs from 1,716 fps to 2,854 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 7 of the 7 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 48–90 %, leaving at least 10 % headroom. The 45.0 gr projectile in 0.223" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, SNPE Vectan BA6 1/2 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon LilGun, Lovex S040, Vihtavuori N110 rank at the top here: for .218 Bee with the .223 | 45gr | Merlin Virtus they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data