Load data for .20 VarTag + .204 | 40gr | Nosler Ballistic Tip Varmint

.20 VarTag cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:40 gr
Bullet Diameter:0.204"
Bullet Length:<<locked>>
Case Length (l3):1.39"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:23.5 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:55,114 psi
Recommended Twist Rate:1:9.5

Load data in caliber .20 VarTag with .204 | 40gr | Nosler Ballistic Tip Varmint bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Norma 200, ADI AR 2207 and Alliant Reloder-7.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>90%48,646 psi88%3163 fps98.6%
Accurate LT-30<<locked>>96%48,820 psi89%3146 fps96.2%
ADI AR 2205<<locked>>82%48,051 psi87%3064 fps100%
ADI AR 2207<<locked>>96%49,023 psi89%3274 fps100%
ADI AR 2219<<locked>>98%48,994 psi89%3287 fps96%
Alliant AR-Compᴾ<<locked>>100%37,188 psi67%3094 fps97.5%
Alliant Reloder-10xᴾ<<locked>>100%46,006 psi83%3241 fps98.4%
Alliant Reloder-7<<locked>>94%49,095 psi89%3228 fps99.1%
Baschieri & Pellagri 106<<locked>>96%47,036 psi85%3120 fps96.3%
Hodgdon H4198<<locked>>96%49,690 psi90%3186 fps95.7%
Hodgdon TrailBossᴾ<<locked>>100%29,936 psi54%2034 fps100%
IMR 4198ᴾ<<locked>>100%48,646 psi88%3238 fps99.3%
IMR 4227<<locked>>88%47,834 psi87%3166 fps99.8%
Lovex D060<<locked>>82%47,892 psi87%3205 fps99%
Lovex D063<<locked>>82%48,385 psi88%3159 fps99.5%
Lovex S053<<locked>>90%48,675 psi88%3166 fps100%
Norma 200<<locked>>98%49,400 psi90%3287 fps99.3%
ReloadSwiss RS 14ᴾ<<locked>>100%29,327 psi53%2077 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%21,625 psi39%1847 fps100%
ReloadSwiss RS 36<<locked>>90%49,734 psi90%3238 fps99.9%
Shooters World Buffalo Rifle<<locked>>82%47,892 psi87%3205 fps99%
Shooters World SOCOM<<locked>>82%48,385 psi88%3159 fps99.5%
SNPE Vectan BA6 1/2<<locked>>94%49,530 psi90%3018 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%47,877 psi87%3248 fps96.8%
Vihtavuori N110<<locked>>84%47,935 psi87%3084 fps100%
Vihtavuori N120<<locked>>96%49,124 psi89%3225 fps100%
Vihtavuori N130ᴾ<<locked>>100%45,078 psi82%3143 fps97.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%34,301 psi62%2858 fps95%
Accurate LT-30<<locked>>94%45,716 psi83%3091 fps95.5%
ADI AR 2205<<locked>>80%44,976 psi82%3012 fps100%
ADI AR 220714.5 gr80%29,921 psi54%2854 fps97.6%
ADI AR 2219<<locked>>96%45,788 psi83%3225 fps95.2%
Alliant AR-Comp<<locked>>96%33,098 psi60%2982 fps95.9%
Alliant Reloder-10x<<locked>>90%33,707 psi61%2966 fps95.1%
Alliant Reloder-715.3 gr82%33,330 psi60%2887 fps95.4%
Baschieri & Pellagri 106<<locked>>94%44,164 psi80%3068 fps95.5%
Hodgdon H4198<<locked>>94%47,268 psi86%3140 fps95.1%
Hodgdon TrailBoss<<locked>>80%21,872 psi40%1824 fps100%
IMR 4198<<locked>>86%32,634 psi59%2874 fps95.4%
IMR 4227<<locked>>80%37,478 psi68%2956 fps98.4%
Lovex D060<<locked>>80%45,527 psi83%3156 fps98.6%
Lovex D063<<locked>>80%45,194 psi82%3100 fps99.1%
Lovex S053<<locked>>80%36,477 psi66%2930 fps99.9%
Norma 20015.9 gr84%31,749 psi58%2897 fps95.2%
ReloadSwiss RS 14<<locked>>80%21,538 psi39%1867 fps100%
ReloadSwiss RS 14<<locked>>80%16,056 psi29%1660 fps100%
ReloadSwiss RS 36<<locked>>80%36,056 psi65%2959 fps98%
Shooters World Buffalo Rifle<<locked>>80%45,527 psi83%3156 fps98.6%
Shooters World SOCOM<<locked>>80%45,194 psi82%3100 fps99.1%
SNPE Vectan BA6 1/2<<locked>>80%34,011 psi62%2746 fps100%
SNPE Vectan SP 3<<locked>>96%42,511 psi77%3140 fps95.4%
Vihtavuori N110<<locked>>80%42,264 psi77%2989 fps100%
Vihtavuori N120<<locked>>80%30,182 psi55%2828 fps98.7%
Vihtavuori N130<<locked>>92%34,954 psi63%2923 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .20 VarTag loaded with the .204 | 40gr | Nosler Ballistic Tip Varmint. ADI AR 2219 delivers the highest muzzle velocity at 3,287 fps; across all powders the maximum-charge window runs from 1,847 fps to 3,287 fps. Alliant AR-Comp gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (380 MPa), the top charges use 39–90 %, leaving at least 10 % headroom. The 40.0 gr projectile in 0.204" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Alliant AR-Comp, Alliant Reloder-10x, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Norma 200, ADI AR 2207, Alliant Reloder-7 rank at the top here: for .20 VarTag with the .204 | 40gr | Nosler Ballistic Tip Varmint they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data