Load data for .17 Libra + .172 | 22gr | Impala LW CFN

.17 Libra cartridge drawing
Impala Bullets logo

Load Specifications

Bullet Manufacturer:Impala Bullets
Bullet Weight:22 gr
Bullet Diameter:0.172"
Bullet Length:<<locked>>
Case Length (l3):1.185"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:11.5 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:62,366 psi
Recommended Twist Rate:1:8.0

Load data in caliber .17 Libra with .172 | 22gr | Impala LW CFN bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon LilGun, Lovex S040 and ADI AR 2205.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS<<locked>>98%53,548 psi86%3402 fps96.4%
ADI APS 450<<locked>>88%56,173 psi90%2674 fps100%
ADI AR 2205ᴾ<<locked>>100%52,779 psi85%3301 fps98.1%
Hodgdon LilGun<<locked>>96%55,361 psi89%3563 fps100%
Hodgdon TrailBossᴾ<<locked>>100%25,773 psi41%2041 fps100%
Lovex S040<<locked>>94%53,664 psi86%3366 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%25,483 psi41%2096 fps100%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%35,143 psi56%2989 fps99.8%
Vihtavuori N110ᴾ<<locked>>100%45,629 psi73%3287 fps99.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS<<locked>>94%47,050 psi75%3287 fps95%
ADI APS 450<<locked>>80%48,675 psi78%2549 fps100%
ADI AR 22058.2 gr90%39,885 psi64%3045 fps95.4%
Hodgdon LilGun7.9 gr80%32,489 psi52%3104 fps98.8%
Hodgdon TrailBoss<<locked>>80%19,479 psi31%1844 fps100%
Lovex S0406.8 gr80%36,158 psi58%3009 fps98.3%
ReloadSwiss RS 14<<locked>>80%18,550 psi30%1867 fps100%
SNPE Vectan BA6 1/2<<locked>>80%22,220 psi36%2575 fps96.1%
Vihtavuori N110<<locked>>80%25,889 psi42%2776 fps95.9%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 9 powders for .17 Libra loaded with the .172 | 22gr | Impala LW CFN. Hodgdon LilGun delivers the highest muzzle velocity at 3,563 fps; across all powders the maximum-charge window runs from 2,041 fps to 3,563 fps. ADI AR 2205 gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (430 MPa), the top charges use 41–90 %, leaving at least 10 % headroom. The 22.0 gr projectile in 0.172" calls for a 1:8.0 twist; slower twists will usually not stabilise this weight. ADI AR 2205, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon LilGun, Lovex S040, ADI AR 2205 rank at the top here: for .17 Libra with the .172 | 22gr | Impala LW CFN they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data