About this bullet
.315 | 118gr | NOE Bullet Molds SWC PB N4 is a bullet made by NOE Bullet Molds. At 118 gr (7.6 g) and a diameter of 0.315'' (8.00 mm) it suits handloads where bullet weight and barrel length have to be matched carefully. Its G1 ballistic coefficient of 0.179 drives velocity retention and wind drift downrange — higher values mean a flatter trajectory at distance.
Load data for .315 | 118gr | NOE Bullet Molds SWC PB N4 bullet is available in the following calibers:
Safety notes
All load data is reference data only. Always start at the minimum charge and work up in small steps while watching for pressure signs. Never exceed the maximum charge published by the powder or bullet manufacturer.
Bullets similar to .315 | 118gr | NOE Bullet Molds SWC PB N4
- .314 | 100gr | Sellier & Bellot LRN
- .314 | 100gr | Sellier & Bellot WC
- .314 | 116gr | NOE Bullet Molds HP GC M5
- .314 | 119gr | NOE Bullet Molds RF PB M5
- .314 | 120gr | NOE Bullet Molds RF GC M5
- .314 | 124gr | NOE Bullet Molds FN GC M3
- .314 | 124gr | NOE Bullet Molds FN PB M3
- .314 | 136gr | NOE Bullet Molds SP GC M1
- .314 | 136gr | NOE Bullet Molds SP PB M1
- .314 | 155gr | NOE Bullet Molds SP PB N2
- .314 | 156gr | NOE Bullet Molds SP GC N2
- .314 | 163gr | NOE Bullet Molds FN GC N3
- .314 | 163gr | NOE Bullet Molds FN PB M2
- .314 | 163gr | NOE Bullet Molds FN PB N3
- .314 | 164gr | NOE Bullet Molds FN GC M2
- .314 | 165gr | NOE Bullet Molds RN GC N3
- .314 | 165gr | NOE Bullet Molds RN PB N3
- .314 | 166gr | NOE Bullet Molds FN GC AS1
- .314 | 166gr | NOE Bullet Molds FN PB AS1
- .314 | 181gr | NOE Bullet Molds FN GC I4
- .314 | 181gr | NOE Bullet Molds FN PB I4
- .314 | 203gr | NOE Bullet Molds SP PB N1
- .314 | 204gr | NOE Bullet Molds SP GC N1
- .314 | 205gr | NOE Bullet Molds FN GC AR2