About this bullet
.226 | 100gr | NOE Bullet Molds FN PB BN is a bullet made by NOE Bullet Molds. At 100 gr (6.5 g) and a diameter of 0.226'' (5.74 mm) it suits handloads where bullet weight and barrel length have to be matched carefully. Its G1 ballistic coefficient of 0.432 drives velocity retention and wind drift downrange — higher values mean a flatter trajectory at distance.
Load data for .226 | 100gr | NOE Bullet Molds FN PB BN bullet is available in the following calibers:
No caliber combinations available yet.
Safety notes
All load data is reference data only. Always start at the minimum charge and work up in small steps while watching for pressure signs. Never exceed the maximum charge published by the powder or bullet manufacturer.
Bullets similar to .226 | 100gr | NOE Bullet Molds FN PB BN
- .225 | 100gr | NOE Bullet Molds FN PB BN
- .225 | 36gr | NOE Bullet Molds RF GC BY5
- .225 | 36gr | NOE Bullet Molds RF- PB BY5
- .225 | 37gr | NOE Bullet Molds RF GC CA2
- .225 | 37gr | NOE Bullet Molds RF PB CA2
- .225 | 39gr | NOE Bullet Molds FN GC B2
- .225 | 39gr | NOE Bullet Molds FN PB B2
- .225 | 46gr | NOE Bullet Molds WFN PB A1
- .225 | 47gr | NOE Bullet Molds WFN GC A1
- .225 | 51gr | NOE Bullet Molds SP GC BA5
- .225 | 51gr | NOE Bullet Molds SP PB BA5
- .225 | 52gr | NOE Bullet Molds RF GC BV4
- .225 | 52gr | NOE Bullet Molds RF PB BV4
- .225 | 57gr | NOE Bullet Molds FN PB A3
- .225 | 58gr | NOE Bullet Molds FN GC A3
- .225 | 62gr | NOE Bullet Molds FN GC A2
- .225 | 62gr | NOE Bullet Molds FN PB A2
- .225 | 62gr | NOE Bullet Molds RN PB A4
- .225 | 63gr | NOE Bullet Molds RN GC A4
- .225 | 63gr | NOE Bullet Molds RN PB AH1
- .225 | 64gr | NOE Bullet Molds RN GC AY4
- .225 | 64gr | NOE Bullet Molds RN PB AY4
- .225 | 65gr | NOE Bullet Molds FN PB B3
- .225 | 66gr | NOE Bullet Molds FN GC B3