
Load Specifications
Load data in caliber .458 x 2'' American with .458 | 325gr | Hornady FTX bullet and 22 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Accurate 5744, Shooters World Buffalo Rifle and Lovex D060.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680ᴾ | <<locked>> | 100% | 47,065 psi | 78% | 2149 fps | 96.5% |
| Accurate 5744 | <<locked>> | 88% | 52,301 psi | 87% | 2228 fps | 98.5% |
| Accurate No. 11 FS | <<locked>> | 92% | 53,577 psi | 89% | 2218 fps | 100% |
| ADI APS 450 | <<locked>> | 82% | 52,750 psi | 88% | 1604 fps | 100% |
| ADI AR 2205 | <<locked>> | 94% | 52,098 psi | 87% | 2129 fps | 100% |
| ADI AR 2207ᴾ | <<locked>> | 100% | 37,420 psi | 62% | 2113 fps | 98.6% |
| Alliant Reloder-7ᴾ | <<locked>> | 100% | 40,248 psi | 67% | 2106 fps | 96.1% |
| Hodgdon LilGun | <<locked>> | 88% | 54,056 psi | 90% | 2251 fps | 100% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 27,398 psi | 46% | 1263 fps | 100% |
| IMR 4227ᴾ | <<locked>> | 100% | 49,458 psi | 82% | 2178 fps | 99.2% |
| Lovex D060 | <<locked>> | 94% | 51,967 psi | 87% | 2224 fps | 98.4% |
| Lovex D063 | <<locked>> | 90% | 51,953 psi | 87% | 2211 fps | 98.5% |
| Lovex S040 | <<locked>> | 88% | 54,215 psi | 90% | 2133 fps | 100% |
| Lovex S053ᴾ | <<locked>> | 100% | 46,702 psi | 78% | 2149 fps | 100% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 26,919 psi | 45% | 1296 fps | 100% |
| ReloadSwiss RS 36ᴾ | <<locked>> | 100% | 47,282 psi | 79% | 2198 fps | 98.9% |
| Shooters World Blackout | <<locked>> | 90% | 51,953 psi | 87% | 2211 fps | 98.5% |
| Shooters World Buffalo Rifle | <<locked>> | 94% | 51,967 psi | 87% | 2224 fps | 98.4% |
| Shooters World SOCOM | <<locked>> | 94% | 52,634 psi | 88% | 2205 fps | 98.9% |
| SNPE Vectan BA6 1/2ᴾ | <<locked>> | 100% | 43,091 psi | 72% | 1998 fps | 100% |
| Vihtavuori N110 | <<locked>> | 98% | 52,692 psi | 88% | 2159 fps | 100% |
| Vihtavuori N120ᴾ | <<locked>> | 100% | 38,000 psi | 63% | 2087 fps | 99.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 96% | 41,176 psi | 69% | 2070 fps | 95.2% |
| Accurate 5744 | 37.6 gr | 80% | 40,901 psi | 68% | 2064 fps | 96.4% |
| Accurate No. 11 FS | <<locked>> | 80% | 36,260 psi | 60% | 1988 fps | 98.4% |
| ADI APS 450 | <<locked>> | 80% | 50,836 psi | 85% | 1581 fps | 100% |
| ADI AR 2205 | <<locked>> | 80% | 34,606 psi | 58% | 1893 fps | 99.3% |
| ADI AR 2207 | <<locked>> | 88% | 26,397 psi | 44% | 1890 fps | 95.2% |
| Alliant Reloder-7 | <<locked>> | 98% | 37,927 psi | 63% | 2070 fps | 95.4% |
| Hodgdon LilGun | <<locked>> | 80% | 41,307 psi | 69% | 2106 fps | 100% |
| Hodgdon TrailBoss | <<locked>> | 80% | 20,102 psi | 34% | 1129 fps | 100% |
| IMR 4227 | <<locked>> | 84% | 30,966 psi | 52% | 1890 fps | 95.3% |
| Lovex D060 | 36 gr | 82% | 36,854 psi | 61% | 1995 fps | 95.3% |
| Lovex D063 | <<locked>> | 80% | 37,434 psi | 62% | 2008 fps | 95.6% |
| Lovex S040 | <<locked>> | 80% | 42,830 psi | 71% | 2001 fps | 100% |
| Lovex S053 | <<locked>> | 80% | 26,455 psi | 44% | 1814 fps | 97.4% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 19,493 psi | 32% | 1152 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 86% | 31,038 psi | 52% | 1939 fps | 95.2% |
| Shooters World Blackout | <<locked>> | 80% | 37,434 psi | 62% | 2008 fps | 95.6% |
| Shooters World Buffalo Rifle | 36 gr | 82% | 36,854 psi | 61% | 1995 fps | 95.3% |
| Shooters World SOCOM | <<locked>> | 80% | 33,576 psi | 56% | 1932 fps | 95% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 25,512 psi | 43% | 1726 fps | 100% |
| Vihtavuori N110 | <<locked>> | 80% | 31,401 psi | 52% | 1880 fps | 100% |
| Vihtavuori N120 | <<locked>> | 84% | 23,960 psi | 40% | 1801 fps | 95.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 22 powders for .458 x 2'' American loaded with the .458 | 325gr | Hornady FTX. Hodgdon LilGun delivers the highest muzzle velocity at 2,251 fps; across all powders the maximum-charge window runs from 1,263 fps to 2,251 fps. Accurate 1680 gives the best case fill at 100 %, and 22 of the 22 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (414 MPa), the top charges use 45–90 %, leaving at least 10 % headroom. Accurate 1680, ADI AR 2207, Alliant Reloder-7 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Accurate 5744, Shooters World Buffalo Rifle, Lovex D060 rank at the top here: for .458 x 2'' American with the .458 | 325gr | Hornady FTX they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.