top of page

Load data for .450 Bushmaster + .452 | 290gr | Matt's Bullets SWC-HP

Recommended Powder(s): Lovex S053

.450 Bushmaster + .452 | 290gr | Matt's Bullets SWC-HP

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.452 | 290gr | Matt's Bullets SWC-HP
Manufacturer SKU:
452-290-SWC-HP
Bullet Weight:
290gr | 18.8g
Bullet Diameter:
0.452" | 11.48mm
Bullet Length:
<<locked>>
Caliber:
.450 Bushmaster load data
Case Length (l3):
1.700" | 43.2mm
Cartridge Length (C.O.L.):
<<locked>>
Seated Depth:
<<locked>>
Shank Seated Depth:
<<locked>>
Case Capacity:
60.0 Grains of Water | 3.90 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39160 psi | 2700 bar
LID:
LID_B12560_C759
Last updated:
2026-07-16
Recommended Twist Rate:
1:40 - 1:34

Load data for 26 loads in caliber .450 Bushmaster with .452 | 290gr | Matt's Bullets SWC-HP bullet and 13 powders such as Lovex S053. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 52.5 fps

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
84%
34983
89%
**46
99%
ADI AR 2207
<<locked>>
97%
29704
76%
**11
95%
[Accurate 1680]*
<<locked>>
94%
34650
88%
**98
92%
[Alliant Reloder-7]*
<<locked>>
97%
31763
81%
**98
92%
IMR 4227
<<locked>>
92%
34896
89%
**05
95%
[Lovex D060]*
<<locked>>
83%
35172
90%
**08
93%
Lovex S053 👍
<<locked>>
93%
34505
88%
**24
99%
ReloadSwiss RS 36
<<locked>>
94%
35244
90%
**57
96%
SNPE Vectan BA6 1/2
<<locked>>
96%
34969
89%
**49
100%
[Shooters World Buffalo Rifle]*
<<locked>>
83%
35172
90%
**08
93%
[Shooters World SOCOM]*
<<locked>>
84%
34867
89%
**88
94%
Vihtavuori N110
<<locked>>
88%
35157
90%
**05
100%
Vihtavuori N120
<<locked>>
97%
30429
78%
**91
97%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
32010
82%
**96
98%
[ADI AR 2207]*
<<locked>>
86%
21074
54%
**95
90%
[Accurate 1680]*
<<locked>>
91%
30937
79%
**32
90%
[Alliant Reloder-7]*
<<locked>>
93%
28297
72%
**32
90%
[IMR 4227]*
<<locked>>
81%
25193
64%
**08
91%
[Lovex D060]*
<<locked>>
81%
32721
84%
**59
92%
Lovex S053
<<locked>>
81%
23728
61%
**08
95%
[ReloadSwiss RS 36]*
<<locked>>
82%
23960
61%
**21
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
22727
58%
**29
100%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
32721
84%
**59
92%
[Shooters World SOCOM]*
<<locked>>
81%
31053
79%
**19
93%
Vihtavuori N110
<<locked>>
81%
28065
72%
**83
100%
[Vihtavuori N120]*
<<locked>>
82%
19406
50%
**16
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page