Load data for .45 ACP + .452 | 185gr | Berry's HBRN

.45 ACP cartridge drawing
Berry's logo

Load Specifications

Bullet Manufacturer:Berry's
Bullet Weight:185 gr
Bullet Diameter:0.452"
Bullet Length:<<locked>>
Case Length (l3):0.898"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:25 Grains of Water
Primer Size:Large Pistol (LP)
Barrel Length:5"
Max. allowed Pressure:18,855 psi

Load data in caliber .45 ACP with .452 | 185gr | Berry's HBRN bullet and 13 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1250²<<locked>>64%16,824 psi89%988 fps98.4%
Alliant Herco*²<<locked>>76%16,694 psi89%1014 fps93.4%
Alliant UNIQUE*²<<locked>>64%16,969 psi90%1024 fps93.5%
Baschieri & Pellagri 102 Pistol²<<locked>>76%16,099 psi85%971 fps100%
Hodgdon TrailBossᴾ<<locked>>100%12,908 psi68%846 fps100%
Maxam CSB 1²<<locked>>64%16,244 psi86%968 fps98.2%
Maxam CSB 2²<<locked>>64%16,273 psi86%1007 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%12,009 psi64%843 fps99.2%
ReloadSwiss RS 20²<<locked>>68%16,433 psi87%1033 fps95.4%
SNPE Vectan A0*²<<locked>>64%16,259 psi86%968 fps92.5%
Vihtavuori N32C Tin Star<<locked>>84%16,578 psi88%922 fps100%
Vihtavuori N340*²<<locked>>64%16,940 psi90%1007 fps93.8%
Winchester AutoComp ²<<locked>>64%16,607 psi88%991 fps97.5%

Start Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1250²<<locked>>60%15,055 psi80%945 fps97.4%
Alliant Herco*²<<locked>>60%11,734 psi62%863 fps87.2%
Alliant UNIQUE*²<<locked>>60%15,403 psi82%978 fps91.9%
Baschieri & Pellagri 102 Pistol²<<locked>>60%11,023 psi58%833 fps99%
Hodgdon TrailBoss²<<locked>>60%7,049 psi37%633 fps97.2%
Maxam CSB 1²<<locked>>60%14,605 psi77%928 fps97.1%
Maxam CSB 2²<<locked>>60%14,576 psi77%965 fps99.9%
ReloadSwiss RS 14*²<<locked>>60%6,744 psi36%620 fps92.5%
ReloadSwiss RS 20*²<<locked>>60%13,213 psi70%938 fps91.8%
SNPE Vectan A0*²<<locked>>60%14,736 psi78%928 fps90.8%
Vihtavuori N32C Tin Star²<<locked>>60%10,341 psi55%768 fps100%
Vihtavuori N340*²<<locked>>60%15,360 psi81%968 fps92.3%
Winchester AutoComp ²<<locked>>60%15,171 psi80%955 fps96.4%

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 13 powders for .45 ACP loaded with the .452 | 185gr | Berry's HBRN. ReloadSwiss RS 20 delivers the highest muzzle velocity at 1,033 fps; across all powders the maximum-charge window runs from 843 fps to 1,033 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 13 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (130 MPa), the top charges use 64–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. As outliers, Alliant Herco, Alliant UNIQUE, SNPE Vectan A0 burn incompletely and react more sensitively to barrel length and temperature. Accurate Solo 1250, Alliant Herco, Alliant UNIQUE stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data