Load data for .38 Short Colt + .356 | 115gr | Berry's HBRN-TP

.38 Short Colt cartridge drawing
Berry's logo

Load Specifications

Bullet Manufacturer:Berry's
Bullet Weight:115 gr
Bullet Diameter:0.356"
Bullet Length:<<locked>>
Case Length (l3):0.755"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:11 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:3"
Max. allowed Pressure:13,053 psi

Load data in caliber .38 Short Colt with .356 | 115gr | Berry's HBRN-TP bullet and 4 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Baschieri & Pellagri 102 Pistol*²<<locked>>72%11,124 psi85%686 fps92.4%
Hodgdon TrailBoss*ᴾ<<locked>>100%9,892 psi76%623 fps94.7%
ReloadSwiss RS 14*ᴾ<<locked>>100%9,471 psi73%617 fps89%
Vihtavuori N32C Tin Star<<locked>>80%11,458 psi88%676 fps99.6%

Start Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Baschieri & Pellagri 102 Pistol*²<<locked>>60%8,557 psi66%600 fps87.6%
Hodgdon TrailBoss*²<<locked>>60%5,961 psi46%466 fps86.6%
ReloadSwiss RS 14*<<locked>>84%7,745 psi59%554 fps85.3%
Vihtavuori N32C Tin Star²<<locked>>60%7,992 psi61%571 fps96.5%

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 4 powders for .38 Short Colt loaded with the .356 | 115gr | Berry's HBRN-TP. Baschieri & Pellagri 102 Pistol delivers the highest muzzle velocity at 686 fps; across all powders the maximum-charge window runs from 617 fps to 686 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 4 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (90 MPa), the top charges use 73–88 %, leaving at least 12 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. As outliers, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss, ReloadSwiss RS 14 burn incompletely and react more sensitively to barrel length and temperature. Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data