Load data for .32 Short Colt + .312 | 71gr | Berry's Round Nose

.32 Short Colt cartridge drawing
Berry's logo

Load Specifications

Bullet Manufacturer:Berry's
Bullet Weight:71 gr
Bullet Diameter:0.312"
Bullet Length:<<locked>>
Case Length (l3):0.65"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:6.8 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:3"
Max. allowed Pressure:14,504 psi

Load data in caliber .32 Short Colt with .312 | 71gr | Berry's Round Nose bullet and 9 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1000*²<<locked>>64%12,560 psi87%719 fps87.1%
ADI AS 30*²<<locked>>64%12,430 psi86%722 fps93.2%
Alliant RED DOT*²<<locked>>68%12,140 psi84%728 fps91.9%
Hodgdon Clays²<<locked>>64%11,879 psi82%682 fps97.4%
Maxam CSB 5²<<locked>>68%12,879 psi89%758 fps96.5%
ReloadSwiss RS 12*²<<locked>>76%12,763 psi88%823 fps89.4%
Rottweil P 801*²<<locked>>64%12,473 psi86%791 fps92.4%
Vihtavuori N320*²<<locked>>72%12,604 psi87%771 fps87.7%
Vihtavuori N32C Tin Star*ᴾ<<locked>>100%10,689 psi74%722 fps94.5%

Start Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1000*²<<locked>>60%11,327 psi78%682 fps85.1%
ADI AS 30*²<<locked>>60%11,153 psi77%682 fps91.4%
Alliant RED DOT*²<<locked>>60%10,907 psi75%692 fps90%
Hodgdon Clays²<<locked>>60%10,573 psi73%646 fps96%
Maxam CSB 5*²<<locked>>60%11,516 psi79%722 fps94.9%
ReloadSwiss RS 12*²<<locked>>68%10,733 psi74%758 fps85.5%
Rottweil P 801*²<<locked>>60%10,356 psi71%725 fps89%
Vihtavuori N320*²<<locked>>68%11,458 psi79%738 fps85.7%
Vihtavuori N32C Tin Star*²<<locked>>72%7,107 psi49%577 fps86%

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 9 powders for .32 Short Colt loaded with the .312 | 71gr | Berry's Round Nose. ReloadSwiss RS 12 delivers the highest muzzle velocity at 823 fps; across all powders the maximum-charge window runs from 682 fps to 823 fps. Vihtavuori N32C Tin Star gives the best case fill at 100 %, and 1 of the 9 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (100 MPa), the top charges use 74–89 %, leaving at least 11 % headroom. Vihtavuori N32C Tin Star reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. As outliers, Accurate Solo 1000, ADI AS 30, Alliant RED DOT burn incompletely and react more sensitively to barrel length and temperature. Accurate Solo 1000, ADI AS 30, Alliant RED DOT stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data