top of page

Load data for .32 Rem. + .318 | 140gr | AERO SB,- smax:13.90

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.32 Rem. + .318 | 140gr | AERO SB,- smax:13.90

Load Specifications

Bullet:
.318 | 140gr | AERO SB,- smax:13.90
Bullet Weight:
140gr | 9.1g
Bullet Diameter:
0.318" | 8.08mm
Bullet Length:
1.098" | 27.9mm
Caliber:
.32 Rem.
Case Length (l3):
2.050" | 52.1mm
Cartridge Length (C.O.L.):
2.487" | 63.2mm
Seated Depth:
0.661" | 16.8mm
Shank Seated Depth:
0.661" | 16.8mm
Case Capacity:
46.0 Grains of Water | 2.99 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
42786 psi | 2950 bar
LID:
LID_B74_C415

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 26 loads in caliber .32 Rem. with .318 | 140gr | AERO SB,- smax:13.90 bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
95%
37666
88%
**15
99%
[Accurate 1680]*
<<locked>>
85%
37449
88%
**23
93%
[Alliant Reloder-10x]*
<<locked>>
96%
31836
74%
**10
94%
Alliant Reloder-7
<<locked>>
94%
38421
90%
**72
97%
[Baschieri & Pellagri 106]*
<<locked>>
96%
38174
89%
**13
92%
IMR 4198
<<locked>>
97%
36840
86%
**36
96%
IMR 4227
<<locked>>
87%
37855
88%
**13
98%
Lovex S053
<<locked>>
88%
37724
88%
**16
100%
Norma 200
<<locked>>
97%
35984
84%
**88
96%
ReloadSwiss RS 36
<<locked>>
87%
37086
87%
**43
98%
SNPE Vectan BA6 1/2
<<locked>>
90%
37376
87%
**92
100%
Vihtavuori N120 👍
<<locked>>
97%
37014
87%
**62
100%
[Vihtavuori N130]*
<<locked>>
96%
30632
72%
**15
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
24323
57%
**00
95%
[Accurate 1680]*
<<locked>>
81%
33069
77%
**34
91%
[Alliant Reloder-10x]*
<<locked>>
89%
25164
59%
**39
90%
[Alliant Reloder-7]*
<<locked>>
81%
25817
60%
**90
91%
[Baschieri & Pellagri 106]*
<<locked>>
92%
32895
77%
**08
90%
[IMR 4198]*
<<locked>>
83%
25005
58%
**47
91%
IMR 4227
<<locked>>
81%
32053
75%
**92
97%
Lovex S053
<<locked>>
81%
30806
72%
**78
99%
[Norma 200]*
<<locked>>
83%
23163
54%
**83
90%
ReloadSwiss RS 36
<<locked>>
81%
30269
71%
**01
96%
SNPE Vectan BA6 1/2
<<locked>>
81%
29254
68%
**51
100%
Vihtavuori N120
<<locked>>
81%
23279
54%
**41
96%
[Vihtavuori N130]*
<<locked>>
91%
26005
61%
**00
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page