top of page

Load data for .308 Marlin Express + .308 | 115gr | AERO SUB,- smax:11.40

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.308 Marlin Express + .308 | 115gr | AERO SUB,- smax:11.40

Load Specifications

Bullet:
.308 | 115gr | AERO SUB,- smax:11.40
Bullet Weight:
115gr | 7.5g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.098" | 27.9mm
Caliber:
.308 Marlin Express
Case Length (l3):
1.910" | 48.5mm
Cartridge Length (C.O.L.):
2.571" | 65.3mm
Seated Depth:
0.437" | 11.1mm
Shank Seated Depth:
0.437" | 11.1mm
Case Capacity:
51.0 Grains of Water | 3.31 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
47863 psi | 3300 bar
LID:
LID_B58_C397

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .308 Marlin Express with .308 | 115gr | AERO SUB,- smax:11.40 bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
91%
43047
90%
**41
100%
ADI AR 2219
<<locked>>
93%
42148
88%
**58
95%
Accurate 2015
<<locked>>
97%
37826
79%
**56
97%
[Accurate 2495]*
<<locked>>
97%
28732
60%
**38
93%
Alliant AR-Comp
<<locked>>
96%
33562
70%
**17
97%
Alliant Reloder-10x 👍
<<locked>>
97%
42511
89%
**64
99%
Alliant Reloder-7 👍
<<locked>>
89%
42786
89%
**02
99%
Baschieri & Pellagri 106
<<locked>>
93%
42685
89%
**56
96%
[Hodgdon H322]*
<<locked>>
96%
38653
81%
**76
94%
[Hodgdon H335]*
<<locked>>
94%
42337
88%
**58
94%
Hodgdon H4198
<<locked>>
90%
42743
89%
**46
95%
Hodgdon TrailBoss
<<locked>>
95%
28340
59%
**36
100%
IMR 4198 👍
<<locked>>
94%
42511
89%
**12
99%
IMR 4227
<<locked>>
83%
42366
89%
**43
100%
[Lovex D073.4]*
<<locked>>
96%
41800
87%
**08
92%
Lovex S053
<<locked>>
85%
42714
89%
**33
100%
Norma 200 👍
<<locked>>
93%
42685
89%
**51
99%
ReloadSwiss RS 14
<<locked>>
97%
28572
60%
**91
100%
ReloadSwiss RS 36
<<locked>>
84%
42525
89%
**89
100%
[ReloadSwiss RS 40]*
<<locked>>
96%
41727
87%
**15
92%
[Rottweil R 901]*
<<locked>>
97%
36114
75%
**00
92%
SNPE Vectan BA6 1/2
<<locked>>
88%
43062
90%
**95
100%
[SNPE Vectan SP 10]*
<<locked>>
93%
42395
89%
**58
94%
[SNPE Vectan Tubal 3000]*
<<locked>>
97%
36709
77%
**38
92%
[Somchem S335]*
<<locked>>
97%
34896
73%
**35
93%
Vihtavuori N120
<<locked>>
93%
42786
89%
**95
100%
Vihtavuori N130
<<locked>>
97%
40408
84%
**53
98%
[Vihtavuori N133]*
<<locked>>
96%
32648
68%
**82
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
31140
65%
**92
99%
[ADI AR 2219]*
<<locked>>
83%
30313
63%
**66
90%
[Accurate 2015]*
<<locked>>
83%
24062
50%
**85
90%
[Accurate 2495]*
<<locked>>
92%
24221
51%
**03
90%
[Alliant AR-Comp]*
<<locked>>
83%
22350
47%
**49
90%
[Alliant Reloder-10x]*
<<locked>>
81%
25585
53%
**44
92%
Alliant Reloder-7
<<locked>>
81%
33069
69%
**89
97%
[Baschieri & Pellagri 106]*
<<locked>>
81%
29138
61%
**48
91%
[Hodgdon H322]*
<<locked>>
89%
30748
64%
**79
90%
[Hodgdon H335]*
<<locked>>
87%
33098
69%
**41
90%
[Hodgdon H4198]*
<<locked>>
81%
32256
67%
**10
91%
Hodgdon TrailBoss
<<locked>>
86%
24526
51%
**50
100%
IMR 4198
<<locked>>
81%
28921
60%
**80
95%
IMR 4227
<<locked>>
81%
39175
82%
**80
99%
[Lovex D073.4]*
<<locked>>
93%
37478
78%
**17
90%
Lovex S053
<<locked>>
81%
38479
80%
**54
100%
Norma 200
<<locked>>
81%
28689
60%
**33
95%
ReloadSwiss RS 14
<<locked>>
83%
22974
48%
**60
100%
ReloadSwiss RS 36
<<locked>>
81%
38276
80%
**07
99%
[ReloadSwiss RS 40]*
<<locked>>
92%
35708
75%
**87
90%
[Rottweil R 901]*
<<locked>>
94%
32692
68%
**12
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
35897
75%
**70
100%
[SNPE Vectan SP 10]*
<<locked>>
86%
33040
69%
**41
90%
[SNPE Vectan Tubal 3000]*
<<locked>>
94%
32750
68%
**49
90%
[Somchem S335]*
<<locked>>
92%
30008
63%
**10
90%
Vihtavuori N120
<<locked>>
81%
29370
61%
**10
99%
[Vihtavuori N130]*
<<locked>>
81%
24540
51%
**56
91%
[Vihtavuori N133]*
<<locked>>
89%
26034
54%
**92
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page