Load data for .300 HAM'R + .311 | 150gr | Speer Hot-Cor

.300 HAM'R cartridge drawing
Speer logo

Load Specifications

Bullet Manufacturer:Speer
Bullet Weight:150 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):1.615"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:31 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:16"
Max. allowed Pressure:57,500 psi
Recommended Twist Rate:1:16.5

Load data in caliber .300 HAM'R with .311 | 150gr | Speer Hot-Cor bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 36, Lovex S053 and Accurate 1680.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>96%50,836 psi88%1995 fps99.2%
Accurate 5744<<locked>>82%51,445 psi89%2005 fps99.7%
Accurate LT-30ᴾ<<locked>>100%48,153 psi84%1952 fps96.6%
Accurate No. 11 FS<<locked>>84%49,893 psi87%1962 fps100%
ADI AR 2205<<locked>>88%51,677 psi90%1916 fps100%
ADI AR 2207ᴾ<<locked>>100%47,587 psi83%2021 fps100%
Alliant Reloder-10xᴾ<<locked>>100%37,260 psi65%1909 fps97.1%
Alliant Reloder-7ᴾ<<locked>>100%50,053 psi87%2024 fps99.5%
Baschieri & Pellagri 106ᴾ<<locked>>100%45,527 psi79%1942 fps96.3%
Hodgdon H4198<<locked>>98%50,647 psi88%1991 fps96.6%
Hodgdon TrailBossᴾ<<locked>>100%27,499 psi48%1161 fps100%
IMR 4198ᴾ<<locked>>100%42,163 psi73%1929 fps98.8%
IMR 4227<<locked>>94%50,952 psi89%1985 fps100%
Lovex D060<<locked>>86%49,095 psi85%1978 fps99.5%
Lovex D063<<locked>>84%51,605 psi90%2001 fps99.8%
Lovex S053<<locked>>96%50,633 psi88%1972 fps100%
Norma 200ᴾ<<locked>>100%41,742 psi73%1972 fps98.8%
ReloadSwiss RS 14ᴾ<<locked>>100%25,831 psi45%1178 fps100%
ReloadSwiss RS 36<<locked>>96%51,967 psi90%2031 fps100%
Shooters World Blackout<<locked>>84%51,605 psi90%2001 fps99.8%
Shooters World Buffalo Rifle<<locked>>86%49,095 psi85%1978 fps99.5%
Shooters World SOCOM<<locked>>86%49,559 psi86%1965 fps99.8%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%51,358 psi89%1867 fps100%
Vihtavuori N110<<locked>>90%50,241 psi87%1909 fps100%
Vihtavuori N120ᴾ<<locked>>100%48,066 psi84%1991 fps100%
Vihtavuori N130ᴾ<<locked>>100%36,985 psi64%1854 fps96.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
Accurate 168018.7 gr84%32,576 psi57%1749 fps95.4%
Accurate 5744<<locked>>80%48,327 psi84%1969 fps99.5%
Accurate LT-30<<locked>>96%41,698 psi73%1870 fps95.1%
Accurate No. 11 FS<<locked>>80%43,105 psi75%1886 fps100%
ADI AR 2205<<locked>>80%39,262 psi68%1775 fps100%
ADI AR 2207<<locked>>80%23,409 psi41%1634 fps96%
Alliant Reloder-10x<<locked>>96%32,387 psi56%1827 fps95.6%
Alliant Reloder-7<<locked>>86%30,748 psi53%1752 fps95.6%
Baschieri & Pellagri 106<<locked>>98%42,148 psi73%1900 fps95.5%
Hodgdon H4198<<locked>>94%43,859 psi76%1906 fps95%
Hodgdon TrailBoss<<locked>>80%19,406 psi34%1033 fps100%
IMR 4198<<locked>>88%28,921 psi50%1709 fps95%
IMR 4227<<locked>>80%31,676 psi55%1722 fps97.8%
Lovex D060<<locked>>80%40,524 psi70%1860 fps98.4%
Lovex D063<<locked>>80%44,599 psi78%1916 fps99.1%
Lovex S05315.3 gr80%30,095 psi52%1699 fps99.6%
Norma 200<<locked>>90%28,718 psi50%1762 fps95.3%
ReloadSwiss RS 14<<locked>>80%18,057 psi31%1047 fps100%
ReloadSwiss RS 3616.6 gr80%30,052 psi52%1729 fps97.2%
Shooters World Blackout<<locked>>80%44,599 psi78%1916 fps99.1%
Shooters World Buffalo Rifle<<locked>>80%40,524 psi70%1860 fps98.4%
Shooters World SOCOM<<locked>>80%39,479 psi69%1837 fps98.7%
SNPE Vectan BA6 1/2<<locked>>80%28,543 psi50%1594 fps100%
Vihtavuori N110<<locked>>80%35,810 psi62%1745 fps100%
Vihtavuori N120<<locked>>80%23,960 psi42%1627 fps97.6%
Vihtavuori N130<<locked>>96%32,285 psi56%1781 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .300 HAM'R loaded with the .311 | 150gr | Speer Hot-Cor. ReloadSwiss RS 36 delivers the highest muzzle velocity at 2,031 fps; across all powders the maximum-charge window runs from 1,161 fps to 2,031 fps. Accurate LT-30 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (396 MPa), the top charges use 45–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.311" calls for a 1:16.5 twist; slower twists will usually not stabilise this weight. Accurate LT-30, ADI AR 2207, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 36, Lovex S053, Accurate 1680 rank at the top here: for .300 HAM'R with the .311 | 150gr | Speer Hot-Cor they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data