top of page

Load data for .300 AAC Blackout + .308 | 165gr | Hornady InterBond

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.300 AAC Blackout + .308 | 165gr | Hornady InterBond

Load Specifications

Bullet:
.308 | 165gr | Hornady InterBond
Manufacturer SKU:
30459
Bullet Weight:
165gr | 10.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.300" | 33.0mm
Caliber:
.300 AAC Blackout
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.441" | 11.2mm
Shank Seated Depth:
0.241" | 6.1mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B2681_C348

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 26 loads in caliber .300 AAC Blackout with .308 | 165gr | Hornady InterBond bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
93%
45121
89%
**75
100%
Accurate 5744
<<locked>>
91%
44701
88%
**37
96%
Accurate No. 11 FS 👍
<<locked>>
90%
44019
87%
**27
99%
Hodgdon LilGun
<<locked>>
88%
45484
90%
**93
100%
IMR 4227
<<locked>>
96%
38305
75%
**49
96%
Lovex D060
<<locked>>
93%
44701
88%
**37
96%
Lovex D063
<<locked>>
89%
43178
85%
**11
95%
Lovex S040
<<locked>>
86%
44933
89%
**65
100%
Lovex S053
<<locked>>
96%
35433
70%
**36
99%
ReloadSwiss RS 36
<<locked>>
97%
37304
73%
**81
96%
Shooters World Blackout
<<locked>>
89%
43178
85%
**11
95%
Shooters World Buffalo Rifle
<<locked>>
93%
44701
88%
**37
96%
Vihtavuori N110
<<locked>>
97%
43932
87%
**08
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
85%
35781
70%
**60
99%
[Accurate 5744]*
<<locked>>
81%
33475
66%
**73
92%
Accurate No. 11 FS
<<locked>>
81%
32735
64%
**73
96%
Hodgdon LilGun
<<locked>>
81%
35563
70%
**78
100%
[IMR 4227]*
<<locked>>
90%
31966
63%
**54
94%
[Lovex D060]*
<<locked>>
83%
33475
66%
**73
92%
[Lovex D063]*
<<locked>>
81%
34243
67%
**86
93%
Lovex S040
<<locked>>
81%
39392
78%
**03
100%
Lovex S053
<<locked>>
89%
29849
59%
**47
97%
[ReloadSwiss RS 36]*
<<locked>>
89%
29472
58%
**54
93%
[Shooters World Blackout]*
<<locked>>
81%
34243
67%
**86
93%
[Shooters World Buffalo Rifle]*
<<locked>>
83%
33475
66%
**73
92%
Vihtavuori N110
<<locked>>
85%
31865
63%
**57
100%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page