top of page

Load data for .30 PICRA + .308 | 150gr | Hornady SST InterLock L1.17

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.30 PICRA + .308 | 150gr | Hornady SST InterLock L1.17

Load Specifications

Bullet:
.308 | 150gr | Hornady SST InterLock L1.17
Manufacturer SKU:
30302
Bullet Weight:
150gr | 9.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.170" | 29.7mm
Caliber:
.30 PICRA
Case Length (l3):
1.291" | 32.8mm
Cartridge Length (C.O.L.):
2.172" | 55.2mm
Seated Depth:
0.289" | 7.3mm
Shank Seated Depth:
0.129" | 3.3mm
Case Capacity:
24.2 Grains of Water | 1.57 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B2672_C311

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .30 PICRA with .308 | 150gr | Hornady SST InterLock L1.17 bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
73%
34896
86%
**47
100%
ADI APS 450
<<locked>>
64%
35578
88%
**33
100%
Accurate 4100
<<locked>>
74%
34998
86%
**39
90%
[Accurate No. 11 FS]*
<<locked>>
85%
36405
90%
**62
83%
Accurate No. 9
<<locked>>
64%
35897
88%
**29
96%
Accurate TCM
<<locked>>
64%
36042
89%
**22
96%
Alliant 2400
<<locked>>
72%
35781
88%
**52
93%
Alliant BLUE DOT
<<locked>>
74%
35505
87%
**19
98%
[Hodgdon H110]*
<<locked>>
79%
34621
85%
**58
86%
Hodgdon LilGun
<<locked>>
81%
36187
89%
**11
94%
Hodgdon TrailBoss
<<locked>>
93%
23612
58%
**9
100%
Lovex D037.2
<<locked>>
63%
34940
86%
**19
95%
Maxam CSB 1
<<locked>>
66%
36477
90%
**32
100%
Ramshot Enforcer
<<locked>>
73%
36535
90%
**65
95%
ReloadSwiss RS 14
<<locked>>
97%
24091
59%
**2
100%
[ReloadSwiss RS 30]*
<<locked>>
95%
34156
84%
**71
89%
Rottweil P 806
<<locked>>
63%
35563
88%
**76
100%
SNPE Vectan A0
<<locked>>
64%
34751
86%
**45
100%
SNPE Vectan BA6 1/2
<<locked>>
97%
34403
85%
**35
96%
SNPE Vectan BA7 1/2
<<locked>>
68%
35389
87%
**11
100%
Shooters World Heavy Pistol
<<locked>>
63%
34940
86%
**19
95%
[Somchem S265]*
<<locked>>
87%
35752
88%
**22
86%
Vihtavuori 3N38
<<locked>>
70%
34751
86%
**86
100%
Vihtavuori N105
<<locked>>
75%
36463
90%
**19
100%
Vihtavuori N110
<<locked>>
90%
35723
88%
**71
94%
Vihtavuori N32C Tin Star
<<locked>>
79%
34940
86%
**17
100%
Vihtavuori N350
<<locked>>
64%
34664
85%
**07
100%
[Winchester 296]*
<<locked>>
79%
35085
86%
**85
83%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
24787
61%
**99
100%
ADI APS 450
<<locked>>
60%
33025
81%
**04
100%
[Accurate 4100]*
<<locked>>
61%
22249
55%
**06
81%
[Accurate No. 11 FS]*
<<locked>>
81%
32460
80%
**06
81%
Accurate No. 9
<<locked>>
61%
32140
79%
**80
94%
Accurate TCM
<<locked>>
61%
32053
79%
**70
95%
[Alliant 2400]*
<<locked>>
61%
25150
62%
**71
87%
Alliant BLUE DOT
<<locked>>
61%
24555
60%
**29
94%
[Hodgdon H110]*
<<locked>>
71%
26397
65%
**14
81%
[Hodgdon LilGun]*
<<locked>>
63%
19014
47%
**93
81%
Hodgdon TrailBoss
<<locked>>
62%
13576
33%
**2
100%
Lovex D037.2
<<locked>>
61%
33083
81%
**89
94%
Maxam CSB 1
<<locked>>
60%
31430
77%
**70
100%
[Ramshot Enforcer]*
<<locked>>
61%
24511
60%
**68
88%
ReloadSwiss RS 14
<<locked>>
61%
12850
32%
**8
100%
[ReloadSwiss RS 30]*
<<locked>>
81%
23525
58%
**65
80%
Rottweil P 806
<<locked>>
61%
33620
83%
**53
100%
SNPE Vectan A0
<<locked>>
61%
32358
80%
**19
100%
[SNPE Vectan BA6 1/2]*
<<locked>>
67%
15577
38%
**5
81%
SNPE Vectan BA7 1/2
<<locked>>
61%
28935
71%
**29
100%
Shooters World Heavy Pistol
<<locked>>
61%
33083
81%
**89
94%
[Somchem S265]*
<<locked>>
78%
27615
68%
**84
81%
Vihtavuori 3N38
<<locked>>
61%
26876
66%
**61
98%
Vihtavuori N105
<<locked>>
61%
23975
59%
**35
99%
[Vihtavuori N110]*
<<locked>>
67%
18130
45%
**40
81%
Vihtavuori N32C Tin Star
<<locked>>
61%
24221
60%
**6
100%
Vihtavuori N350
<<locked>>
61%
32184
79%
**78
100%
[Winchester 296]*
<<locked>>
76%
31473
77%
**19
81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page