top of page

Load data for .30 BR + .308 | 145gr | SUS-TAC Blackout (S/B) 

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.30 BR + .308 | 145gr | SUS-TAC Blackout (S/B) 

Load Specifications

Bullet:
.308 | 145gr | SUS-TAC Blackout (S/B) 
Manufacturer SKU:
H12892
Bullet Weight:
145gr | 9.4g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.250" | 31.7mm
Caliber:
.30 BR
Case Length (l3):
1.501" | 38.1mm
Cartridge Length (C.O.L.):
2.265" | 57.5mm
Seated Depth:
0.486" | 12.3mm
Shank Seated Depth:
0.365" | 9.3mm
Case Capacity:
41.0 Grains of Water | 2.66 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
58740 psi | 4050 bar
LID:
LID_B10333_C297

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .30 BR with .308 | 145gr | SUS-TAC Blackout (S/B)  bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
86%
51909
88%
**33
100%
ADI AR 2207 👍
<<locked>>
97%
47529
81%
**61
100%
ADI AR 2219
<<locked>>
96%
42931
73%
**11
96%
Accurate 1680 👍
<<locked>>
90%
52707
90%
**80
99%
Accurate 2015
<<locked>>
96%
34389
59%
**60
96%
[Accurate 2495]*
<<locked>>
96%
25541
43%
**59
92%
Accurate 5744
<<locked>>
84%
52823
90%
**67
100%
Alliant AR-Comp
<<locked>>
96%
31082
53%
**31
97%
Alliant Reloder-10x
<<locked>>
96%
38696
66%
**49
98%
Alliant Reloder-7 👍
<<locked>>
96%
49588
84%
**51
100%
Baschieri & Pellagri 106
<<locked>>
96%
44991
77%
**56
97%
[Hodgdon CFE BLK]*
<<locked>>
97%
52504
89%
**31
93%
[Hodgdon H322]*
<<locked>>
96%
35940
61%
**83
93%
[Hodgdon H335]*
<<locked>>
96%
42221
72%
**05
94%
Hodgdon H4198
<<locked>>
97%
49182
84%
**02
97%
IMR 4198
<<locked>>
96%
41901
71%
**46
99%
IMR 4227
<<locked>>
92%
52634
90%
**34
100%
Lovex D060
<<locked>>
85%
51880
88%
**54
100%
Lovex S053
<<locked>>
94%
52504
89%
**15
100%
Norma 200 👍
<<locked>>
96%
43743
74%
**21
99%
ReloadSwiss RS 36 👍
<<locked>>
93%
52199
89%
**70
100%
[ReloadSwiss RS 40]*
<<locked>>
96%
38319
65%
**13
91%
SNPE Vectan BA6 1/2
<<locked>>
96%
50923
87%
**60
100%
SNPE Vectan SP 10
<<locked>>
97%
43584
74%
**31
95%
Shooters World Buffalo Rifle
<<locked>>
85%
51880
88%
**54
100%
[Somchem S335]*
<<locked>>
96%
31575
54%
**56
92%
Vihtavuori N110
<<locked>>
87%
51982
88%
**39
100%
Vihtavuori N120
<<locked>>
96%
43526
74%
**59
100%
Vihtavuori N130
<<locked>>
97%
37420
64%
**67
97%
[Vihtavuori N133]*
<<locked>>
97%
31198
53%
**39
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
45527
78%
**51
100%
ADI AR 2207
<<locked>>
81%
29515
50%
**46
99%
[ADI AR 2219]*
<<locked>>
85%
30110
51%
**49
90%
Accurate 1680
<<locked>>
81%
39131
67%
**67
96%
[Accurate 2015]*
<<locked>>
83%
22902
39%
**78
90%
[Accurate 2495]*
<<locked>>
93%
23076
39%
**90
90%
Accurate 5744
<<locked>>
81%
47877
82%
**95
100%
[Alliant AR-Comp]*
<<locked>>
83%
21321
36%
**39
90%
[Alliant Reloder-10x]*
<<locked>>
81%
24149
41%
**18
92%
Alliant Reloder-7
<<locked>>
81%
31314
53%
**36
96%
[Baschieri & Pellagri 106]*
<<locked>>
81%
27586
47%
**14
90%
[Hodgdon CFE BLK]*
<<locked>>
90%
41843
71%
**74
90%
[Hodgdon H322]*
<<locked>>
90%
29457
50%
**36
90%
[Hodgdon H335]*
<<locked>>
88%
32735
56%
**15
90%
[Hodgdon H4198]*
<<locked>>
81%
30951
53%
**70
91%
IMR 4198
<<locked>>
81%
27456
47%
**37
95%
IMR 4227
<<locked>>
81%
37507
64%
**08
99%
Lovex D060
<<locked>>
81%
45513
77%
**59
99%
Lovex S053
<<locked>>
81%
36216
62%
**82
100%
Norma 200
<<locked>>
81%
27456
47%
**00
95%
ReloadSwiss RS 36
<<locked>>
81%
36158
62%
**28
99%
[ReloadSwiss RS 40]*
<<locked>>
93%
34983
60%
**47
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
33997
58%
**31
100%
[SNPE Vectan SP 10]*
<<locked>>
87%
31749
54%
**98
90%
Shooters World Buffalo Rifle
<<locked>>
81%
45513
77%
**59
99%
[Somchem S335]*
<<locked>>
93%
28776
49%
**90
90%
Vihtavuori N110
<<locked>>
81%
43540
74%
**34
100%
Vihtavuori N120
<<locked>>
81%
28123
48%
**77
99%
[Vihtavuori N130]*
<<locked>>
81%
23569
40%
**46
91%
[Vihtavuori N133]*
<<locked>>
89%
25019
43%
**82
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page