top of page

Load data for .30-30 Win. + .308 | 115gr | AERO SUB,- smax:11.40

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.30-30 Win. + .308 | 115gr | AERO SUB,- smax:11.40

Load Specifications

Bullet:
.308 | 115gr | AERO SUB,- smax:11.40
Bullet Weight:
115gr | 7.5g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.098" | 27.9mm
Caliber:
.30-30 Win.
Case Length (l3):
2.039" | 51.8mm
Cartridge Length (C.O.L.):
2.512" | 63.8mm
Seated Depth:
0.625" | 15.9mm
Shank Seated Depth:
0.625" | 15.9mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B58_C328

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 32 loads in caliber .30-30 Win. with .308 | 115gr | AERO SUB,- smax:11.40 bullet and 16 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
96%
87%
100%
Accurate 1680
86%
88%
94%
Accurate 2015
97%
65%
92%
Alliant Reloder-10x
96%
71%
94%
Alliant Reloder-7
94%
87%
97%
Baschieri & Pellagri 106
97%
87%
93%
Hodgdon H4198
95%
90%
92%
IMR 4198
97%
82%
97%
IMR 4227
87%
87%
99%
Lovex S053
90%
89%
100%
Norma 200
96%
81%
97%
ReloadSwiss RS 36
89%
88%
99%
SNPE Vectan BA6 1/2
92%
88%
100%
Vihtavuori N110
83%
87%
100%
Vihtavuori N120
97%
83%
100%
Vihtavuori N130
97%
71%
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
25019
54%
**31
95%
[Accurate 1680]*
<<locked>>
81%
34403
74%
**69
92%
[Accurate 2015]*
<<locked>>
94%
27006
58%
**74
90%
[Alliant Reloder-10x]*
<<locked>>
88%
25324
55%
**41
90%
[Alliant Reloder-7]*
<<locked>>
81%
27021
58%
**28
92%
[Baschieri & Pellagri 106]*
<<locked>>
90%
32866
71%
**00
90%
[Hodgdon H4198]*
<<locked>>
91%
36347
78%
**72
90%
[IMR 4198]*
<<locked>>
82%
24772
53%
**46
90%
IMR 4227
<<locked>>
81%
32851
71%
**26
97%
Lovex S053
<<locked>>
81%
31633
68%
**06
99%
[Norma 200]*
<<locked>>
82%
23264
50%
**82
90%
ReloadSwiss RS 36
<<locked>>
81%
31241
67%
**33
96%
SNPE Vectan BA6 1/2
<<locked>>
81%
30023
65%
**82
100%
Vihtavuori N110
<<locked>>
81%
37695
81%
**85
100%
Vihtavuori N120
<<locked>>
81%
23917
52%
**65
96%
[Vihtavuori N130]*
<<locked>>
89%
26034
56%
**01
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page