top of page

Load data for .22 Rem. Jet Mag. + .222 | 32gr | AERO SB,- smax:6.50

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.22 Rem. Jet Mag. + .222 | 32gr | AERO SB,- smax:6.50

Load Specifications

Bullet:
.222 | 32gr | AERO SB,- smax:6.50
Bullet Weight:
32gr | 2.1g
Bullet Diameter:
0.222" | 5.64mm
Bullet Length:
0.531" | 13.5mm
Caliber:
.22 Rem. Jet Mag.
Case Length (l3):
1.278" | 32.5mm
Cartridge Length (C.O.L.):
1.635" | 41.5mm
Seated Depth:
0.174" | 4.4mm
Shank Seated Depth:
0.174" | 4.4mm
Case Capacity:
18.5 Grains of Water | 1.20 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
36985 psi | 2550 bar
LID:
LID_B4_C89

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 58 loads in caliber .22 Rem. Jet Mag. with .222 | 32gr | AERO SB,- smax:6.50 bullet and 29 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
78%
32489
88%
**44
96%
ADI APS 350
<<locked>>
62%
32880
89%
**49
100%
ADI APS 450
<<locked>>
63%
32343
87%
**78
100%
ADI AS 30
<<locked>>
64%
33199
90%
**37
100%
[Accurate No. 9]*
<<locked>>
68%
32561
88%
**44
82%
Accurate Solo 1000
<<locked>>
63%
33083
89%
**67
100%
Accurate Solo 1250
<<locked>>
65%
32358
87%
**16
100%
[Accurate TCM]*
<<locked>>
68%
32416
88%
**64
84%
[Alliant BLUE DOT]*
<<locked>>
78%
32489
88%
**64
87%
Alliant POWER PISTOL
<<locked>>
64%
32895
89%
**06
96%
Alliant UNIQUE
<<locked>>
63%
31850
86%
**85
100%
Hodgdon TrailBoss
<<locked>>
95%
20682
56%
**39
100%
[Lovex D037.2]*
<<locked>>
67%
32561
88%
**44
82%
Maxam CSB 1
<<locked>>
67%
32140
87%
**16
100%
Maxam CSB 2
<<locked>>
64%
33011
89%
**06
100%
Maxam CSB 3
<<locked>>
64%
32735
88%
**00
100%
ReloadSwiss RS 14
<<locked>>
96%
19870
54%
**52
100%
ReloadSwiss RS 20
<<locked>>
65%
32750
89%
**98
100%
ReloadSwiss RS 24
<<locked>>
66%
32314
87%
**60
90%
Rottweil P 806 👍
<<locked>>
68%
32924
89%
**54
99%
SNPE Vectan A0
<<locked>>
67%
32053
87%
**59
100%
SNPE Vectan BA7 1/2 👍
<<locked>>
72%
33199
90%
**41
100%
[Shooters World Heavy Pistol]*
<<locked>>
67%
32561
88%
**44
82%
Somchem MS200
<<locked>>
64%
32996
89%
**78
100%
Vihtavuori 3N37
<<locked>>
65%
32213
87%
**14
100%
Vihtavuori 3N38
<<locked>>
75%
32401
88%
**41
91%
Vihtavuori N105
<<locked>>
79%
31923
86%
**90
94%
Vihtavuori N32C Tin Star
<<locked>>
82%
32851
89%
**68
100%
Vihtavuori N350
<<locked>>
68%
33098
89%
**54
100%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AP 100]*
<<locked>>
61%
20001
54%
**86
88%
ADI APS 350
<<locked>>
60%
31328
85%
**22
100%
ADI APS 450
<<locked>>
61%
30966
84%
**36
100%
ADI AS 30
<<locked>>
62%
31720
86%
**04
100%
[Accurate No. 9]*
<<locked>>
66%
30501
82%
**95
80%
Accurate Solo 1000
<<locked>>
61%
31560
85%
**44
100%
Accurate Solo 1250
<<locked>>
62%
29428
80%
**60
100%
[Accurate TCM]*
<<locked>>
64%
28181
76%
**52
80%
[Alliant BLUE DOT]*
<<locked>>
69%
24511
66%
**37
80%
Alliant POWER PISTOL
<<locked>>
62%
30400
82%
**31
94%
Alliant UNIQUE
<<locked>>
60%
29254
79%
**16
100%
Hodgdon TrailBoss
<<locked>>
62%
11240
30%
**14
100%
[Lovex D037.2]*
<<locked>>
65%
30501
82%
**95
80%
Maxam CSB 1
<<locked>>
61%
26861
73%
**01
100%
Maxam CSB 2
<<locked>>
61%
30110
81%
**57
100%
Maxam CSB 3
<<locked>>
61%
29689
80%
**41
100%
ReloadSwiss RS 14
<<locked>>
61%
10414
28%
**98
100%
ReloadSwiss RS 20
<<locked>>
61%
28616
77%
**93
100%
[ReloadSwiss RS 24]*
<<locked>>
61%
27717
75%
**62
87%
Rottweil P 806
<<locked>>
61%
25730
70%
**83
96%
SNPE Vectan A0
<<locked>>
61%
26890
73%
**41
100%
SNPE Vectan BA7 1/2
<<locked>>
61%
24337
66%
**98
97%
[Shooters World Heavy Pistol]*
<<locked>>
65%
30501
82%
**95
80%
Somchem MS200
<<locked>>
61%
30385
82%
**29
100%
Vihtavuori 3N37
<<locked>>
61%
28297
77%
**42
99%
[Vihtavuori 3N38]*
<<locked>>
61%
21176
57%
**16
82%
[Vihtavuori N105]*
<<locked>>
61%
17419
47%
**27
81%
Vihtavuori N32C Tin Star
<<locked>>
62%
21147
57%
**19
100%
Vihtavuori N350
<<locked>>
62%
26701
72%
**96
99%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page