top of page
5 mm / 35 SMc
Technical Specifications:
Caliber: | 5 mm / 35 SMc |
Bullet Diameter: | 0.204" | 5.18mm |
Primer Size: | Large Rifle (LR) |
Max. Case Length (l3): | 1.555" | 39.50mm |
Max. Cartridge Length / OAL: | 2.100" | 53.34mm |
Max. Standardized : | 63817 psi | 4400 bar |
Case Capacity: | 37.0 Grains of Water | 2.40 cm3 |
CID: | CID_899 |
Letztes Update: | 5/7/2024 |
The 5mm/35 SMc cartridge is a relatively new rifle cartridge designed by American gunsmith Michael McPherson in the early 2000s. The cartridge has a bullet diameter of 5mm and a case length of 35mm, which gives it a relatively small size but high velocity.
The 5mm/35 SMc cartridge is designed for long-range shooting and is known for its flat trajectory and accuracy. It has a high ballistic coefficient, which helps it retain velocity and energy over longer distances.
The cartridge is primarily used in custom-built rifles and has gained popularity among long-range target shooters and hunters. However, due to its relatively new design and limited availability, it is not as widely used as some other rifle cartridges.
The 5mm/35 SMc cartridge is designed for long-range shooting and is known for its flat trajectory and accuracy. It has a high ballistic coefficient, which helps it retain velocity and energy over longer distances.
The cartridge is primarily used in custom-built rifles and has gained popularity among long-range target shooters and hunters. However, due to its relatively new design and limited availability, it is not as widely used as some other rifle cartridges.
Loads available in this caliber with the following bullets
Filter by weight:
bottom of page