TPM Load Data
Our TPM load data covers 3,118 load recipes for 1 bullets and 21 calibers. Find all bullets and reloading data below and compare the performance of different powders for each bullet and caliber combination side-by-side.
TPM stands for Tir Précision Monométallique ("monometallic precision shooting"), a French brand of high-performance solid bullets. The bullets are made in France and are designed as a one-piece (monobloc) projectile, machined from a single metal rather than the traditional lead core and copper jacket. The brand is produced by the company PLUBEAU, with the first TPM projectiles conceived in the 2010s. Armurerie
They initially targeted regulated-arms shooting (TAR, Tir aux Armes Règlementaires), then expanded into long-range (TLD, Tir Longue Distance) and Extreme Long Range (ELR) disciplines, where the brand quickly gained recognition for its ballistic performance. The monolithic design appeals to long-range competitors and to hunters in regions restricting lead ammunition.
The catalogue spans several lines (such as MF, P, and the long-range XTLD series) across many calibres. Examples include a .264-diameter TPM264MF and XTLD-series loads like a 179-grain .308 for .308 Winchester, a 250-grain .338 for .338 Lapua Magnum, and a 440-grain .408 for .408 CheyTac. Products are sold through French retailers and the official site, balle-tpm.com, mainly to handloaders.
Bullets Covered
1 bullet
All TPM Load Data
.338 RCM + .338 | 165gr | TPM XTLD
.338 Marlin Express + .338 | 165gr | TPM XTLD
.338 Rem. Ultra Mag. + .338 | 165gr | TPM XTLD
.338-378 Weath. Mag. + .338 | 165gr | TPM XTLD
8.5 x 63 R + .338 | 165gr | TPM XTLD
.33 Win. + .338 | 165gr | TPM XTLD
.338 Blaser Mag. + .338 | 165gr | TPM XTLD
About TPM load data on XXL Reloading
This page collects every TPM bullet we hold reloading data for, grouped by caliber and bullet weight. Each caliber and bullet combination links to a detail page with powder-by-powder load recipes: powder brand and type, start and maximum charge weight in grains and grams, case fill ratio, calculated peak chamber pressure, muzzle velocity and the barrel length the load was computed for.
Unlike a manufacturer's own tables, our TPM data is generated with an inner-ballistics engine across the full powder range, so you can compare many powders side by side for the same bullet instead of the handful a single load manual prints. Charge weights, pressures and velocities are modelled consistently, which makes cross-powder and cross-caliber comparison meaningful when you work up a load.
Use the caliber and bullet-weight filters above to narrow the list, switch to the Bullets tab to browse the TPM product range, and open any combination to see the full load table. All data is calculated reference data for experienced handloaders: always start at the minimum charge, work up carefully in your own rifle, and cross-check against current published data before firing.