top of page

Load data for .505 Mag. Gibbs + .504 | 525gr | Rhino Solid Shank

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): none

.505 Mag. Gibbs + .504 | 525gr | Rhino Solid Shank

Load Specifications

Bullet:
.504 | 525gr | Rhino Solid Shank
Bullet Weight:
525gr | 34.0g
Bullet Diameter:
0.504" | 12.80mm
Bullet Length:
1.377" | 35.0mm
Caliber:
.505 Mag. Gibbs
Case Length (l3):
3.150" | 80.0mm
Cartridge Length (C.O.L.):
3.694" | 93.8mm
Seated Depth:
0.833" | 21.2mm
Shank Seated Depth:
0.833" | 21.2mm
Case Capacity:
181.0 Grains of Water | 11.75 cm³
Primer Size:
Large Rifle Magnum (LRM)
Max. allowed Pressure:
39160 psi | 2700 bar
LID:
LID_B5273_C869

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 56 loads in caliber .505 Mag. Gibbs with .504 | 525gr | Rhino Solid Shank bullet and 28 powders such as none. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 4350
<<locked>>
90%
34983
89%
**51
95%
Alliant Reloder-16
<<locked>>
89%
35085
90%
**41
95%
Alliant Reloder-17
<<locked>>
86%
35012
89%
**67
97%
Alliant Reloder-23
<<locked>>
97%
31328
80%
**85
95%
[Alliant Reloder-26]*
<<locked>>
97%
33692
86%
**80
93%
[Hodgdon H414]*
<<locked>>
85%
35128
90%
**24
91%
Hodgdon Hybrid 100V
<<locked>>
92%
35128
90%
**18
97%
[Hodgdon LVR]*
<<locked>>
87%
35027
89%
**18
94%
[IMR 4451 Enduron]*
<<locked>>
83%
35201
90%
**46
91%
IMR 4831
<<locked>>
95%
34954
89%
**31
95%
[Lovex S065]*
<<locked>>
86%
35114
90%
**62
93%
[Lovex S070]*
<<locked>>
88%
35157
90%
**78
92%
Norma URP
<<locked>>
90%
35027
89%
**38
95%
[Ramshot Hunter]*
<<locked>>
90%
34969
89%
**31
92%
ReloadSwiss RS 60
<<locked>>
87%
34853
89%
**74
98%
ReloadSwiss RS 62
<<locked>>
90%
35230
90%
**67
95%
[ReloadSwiss RS 70]*
<<locked>>
90%
34969
89%
**47
93%
Rottweil R 903
<<locked>>
84%
35056
90%
**98
97%
[SNPE Vectan Tubal 7000]*
<<locked>>
87%
34969
89%
**29
92%
[Shooters World Long Rifle]*
<<locked>>
86%
35114
90%
**62
93%
Somchem S365
<<locked>>
93%
35027
89%
**80
98%
Vihtavuori N135
<<locked>>
84%
35128
90%
**56
100%
Vihtavuori N150
<<locked>>
88%
35186
90%
**72
98%
Vihtavuori N160
<<locked>>
87%
34954
89%
**98
95%
Vihtavuori N550
<<locked>>
87%
34925
89%
**34
95%
Vihtavuori N555
<<locked>>
97%
32721
84%
**38
95%
Winchester 6.5 StaBALL
<<locked>>
88%
35114
90%
**85
97%
[Winchester 760]*
<<locked>>
85%
35128
90%
**24
91%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 4350]*
<<locked>>
81%
25425
65%
**18
90%
[Alliant Reloder-16]*
<<locked>>
81%
27180
69%
**34
90%
Alliant Reloder-17
<<locked>>
81%
29921
76%
**46
95%
[Alliant Reloder-23]*
<<locked>>
89%
24439
62%
**85
90%
[Alliant Reloder-26]*
<<locked>>
93%
29472
75%
**72
90%
[Hodgdon H414]*
<<locked>>
83%
32518
83%
**69
90%
[Hodgdon Hybrid 100V]*
<<locked>>
81%
24772
63%
**55
92%
[Hodgdon LVR]*
<<locked>>
81%
29312
75%
**83
91%
[IMR 4451 Enduron]*
<<locked>>
81%
32996
84%
**00
90%
[IMR 4831]*
<<locked>>
84%
25280
65%
**95
90%
[Lovex S065]*
<<locked>>
81%
30284
77%
**54
91%
[Lovex S070]*
<<locked>>
84%
31502
80%
**00
90%
[Norma URP]*
<<locked>>
81%
26672
68%
**28
91%
[Ramshot Hunter]*
<<locked>>
86%
30734
78%
**29
90%
ReloadSwiss RS 60
<<locked>>
81%
29182
75%
**26
95%
[ReloadSwiss RS 62]*
<<locked>>
82%
26847
69%
**60
90%
[ReloadSwiss RS 70]*
<<locked>>
85%
30327
77%
**29
90%
Rottweil R 903
<<locked>>
81%
32010
82%
**36
96%
[SNPE Vectan Tubal 7000]*
<<locked>>
84%
31430
80%
**60
90%
[Shooters World Long Rifle]*
<<locked>>
81%
30284
77%
**54
91%
[Somchem S365]*
<<locked>>
81%
23888
61%
**78
93%
Vihtavuori N135
<<locked>>
81%
32126
82%
**00
100%
Vihtavuori N150
<<locked>>
81%
28224
72%
**18
96%
[Vihtavuori N160]*
<<locked>>
81%
29095
74%
**64
92%
[Vihtavuori N550]*
<<locked>>
81%
29080
74%
**93
92%
[Vihtavuori N555]*
<<locked>>
87%
24642
63%
**21
90%
[Winchester 6.5 StaBALL]*
<<locked>>
81%
28108
72%
**18
94%
[Winchester 760]*
<<locked>>
83%
32518
83%
**69
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page