top of page

Load data for .300 AAC Blackout + .308 | 150gr | AERO SB | HSD 1.5,- smax:15.90

Recommended Powder(s): Hodgdon LilGun

.300 AAC Blackout + .308 | 150gr | AERO SB | HSD 1.5,- smax:15.90

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 150gr | AERO SB | HSD 1.5,- smax:15.90
Bullet Weight:
150gr | 9.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.276" | 32.4mm
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.417" | 10.6mm
Shank Seated Depth:
0.417" | 10.6mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B65_C348
Last updated:
2025-01-01

Load data for 26 loads in caliber .300 AAC Blackout with .308 | 150gr | AERO SB | HSD 1.5,- smax:15.90 bullet and 13 powders such as Hodgdon LilGun. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
97%
45643
90%
**60
99%
[Accurate 5744]*
<<locked>>
93%
43511
86%
**00
94%
Accurate No. 11 FS
<<locked>>
94%
43627
86%
**06
97%
Hodgdon LilGun 👍
<<locked>>
92%
45281
89%
**98
100%
[IMR 4227]*
<<locked>>
95%
33388
66%
**55
93%
[Lovex D060]*
<<locked>>
95%
43511
86%
**00
94%
[Lovex D063]*
<<locked>>
92%
43134
85%
**86
94%
Lovex S040
<<locked>>
89%
44846
88%
**60
100%
Lovex S053
<<locked>>
96%
31459
62%
**59
97%
[ReloadSwiss RS 36]*
<<locked>>
97%
32140
63%
**78
92%
[Shooters World Blackout]*
<<locked>>
92%
43134
85%
**86
94%
[Shooters World Buffalo Rifle]*
<<locked>>
95%
43511
86%
**00
94%
Vihtavuori N110
<<locked>>
95%
36332
72%
**14
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
85%
31488
62%
**70
96%
[Accurate 5744]*
<<locked>>
85%
34330
68%
**59
91%
[Accurate No. 11 FS]*
<<locked>>
81%
28108
55%
**73
93%
Hodgdon LilGun
<<locked>>
81%
30371
60%
**11
100%
[IMR 4227]*
<<locked>>
91%
29762
59%
**86
91%
[Lovex D060]*
<<locked>>
87%
34330
68%
**59
91%
[Lovex D063]*
<<locked>>
85%
33852
67%
**52
90%
Lovex S040
<<locked>>
81%
34432
68%
**26
100%
Lovex S053
<<locked>>
90%
26034
51%
**60
95%
[ReloadSwiss RS 36]*
<<locked>>
93%
28776
57%
**16
90%
[Shooters World Blackout]*
<<locked>>
85%
33852
67%
**52
90%
[Shooters World Buffalo Rifle]*
<<locked>>
87%
34330
68%
**59
91%
Vihtavuori N110
<<locked>>
84%
25962
51%
**50
99%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page