Load data for .260 PICRA + .264 | 90gr | AERO ECO,- smax:11.60

Recommended Powder(s): Alliant 2400, Hodgdon LilGun

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.264 \| 90gr \| AERO ECO,- smax:11.60
Bullet Weight:	90gr \| 5.8g
Bullet Diameter:	0.264" \| 6.71mm
Bullet Length:	0.909" \| 23.1mm
Caliber:	.260 PICRA load data
Case Length (l3):	1.515" \| 38.5mm
Cartridge Length (C.O.L.):	2.302" \| 58.5mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	38.6 Grains of Water \| 2.51 cm³
Primer Size:	Large Pistol (LP)
Max. allowed Pressure:	56565 psi \| 3900 bar
LID:	LID_B30_C251
Last updated:	2025-01-01

Load data for 78 loads in caliber .260 PICRA with .264 | 90gr | AERO ECO,- smax:11.60 bullet and 39 powders such as Alliant 2400, Hodgdon LilGun. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	49647	88%	**49	100%
ADI APS 350	<<locked>>	74%	49371	87%	**29	100%
ADI APS 450	<<locked>>	75%	50314	89%	**49	100%
ADI AS 30	<<locked>>	71%	50662	90%	**75	100%
ADI AS 50N	<<locked>>	64%	50096	89%	**94	100%
Accurate 4100	<<locked>>	66%	49661	88%	**14	97%
Accurate No. 11 FS	<<locked>>	73%	49864	88%	**50	93%
Accurate Solo 1000	<<locked>>	68%	50154	89%	**01	100%
Accurate Solo 1250	<<locked>>	67%	50720	90%	**24	100%
Alliant 2400 👍	<<locked>>	65%	50546	89%	**44	99%
Alliant BLUE DOT	<<locked>>	69%	49908	88%	**11	100%
Baschieri & Pellagri 100	<<locked>>	65%	49574	88%	**78	100%
Hodgdon Clays	<<locked>>	74%	50879	90%	**62	100%
Hodgdon H110	<<locked>>	69%	50357	89%	**57	95%
Hodgdon LilGun 👍	<<locked>>	68%	49821	88%	**27	99%
Hodgdon TrailBoss	<<locked>>	96%	30168	53%	**70	100%
Maxam CSB 1	<<locked>>	69%	49661	88%	**11	100%
Maxam CSB 2	<<locked>>	64%	49501	88%	**98	100%
Maxam CSB 3	<<locked>>	67%	49617	88%	**91	100%
Maxam CSB 4	<<locked>>	67%	50894	90%	**04	100%
Maxam CSB 5	<<locked>>	66%	49356	87%	**68	100%
Ramshot Enforcer	<<locked>>	63%	49661	88%	**31	99%
ReloadSwiss RS 14	<<locked>>	95%	29849	53%	**80	100%
ReloadSwiss RS 30	<<locked>>	82%	49443	87%	**34	97%
SNPE Vectan A0	<<locked>>	66%	49342	87%	**50	100%
SNPE Vectan BA 9	<<locked>>	63%	50720	90%	**40	100%
SNPE Vectan BA10	<<locked>>	69%	49530	88%	**49	100%
SNPE Vectan BA6 1/2	<<locked>>	86%	49676	88%	**98	100%
SNPE Vectan BA7 1/2	<<locked>>	67%	49661	88%	**93	100%
SNPE Vectan BA9 1/2	<<locked>>	64%	50662	90%	**37	100%
Somchem MS200	<<locked>>	64%	50705	90%	**67	100%
Somchem S265	<<locked>>	79%	50154	89%	**18	95%
Vihtavuori 3N38	<<locked>>	66%	49617	88%	**85	100%
Vihtavuori N105	<<locked>>	67%	49559	88%	**75	100%
Vihtavuori N110	<<locked>>	78%	50415	89%	**41	99%
Vihtavuori N320	<<locked>>	63%	50024	88%	**88	100%
Vihtavuori N32C Tin Star	<<locked>>	90%	50763	90%	**22	100%
Vihtavuori N350	<<locked>>	64%	50415	89%	**03	100%
Winchester 296	<<locked>>	68%	50807	90%	**64	92%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	37420	66%	**58	100%
ADI APS 350	<<locked>>	61%	38101	67%	**75	100%
ADI APS 450	<<locked>>	61%	38145	67%	**94	100%
ADI AS 30	<<locked>>	61%	40625	72%	**44	100%
ADI AS 50N	<<locked>>	61%	46572	82%	**55	100%
Accurate 4100	<<locked>>	61%	41249	73%	**03	95%
[Accurate No. 11 FS]*	<<locked>>	61%	32358	57%	**26	83%
Accurate Solo 1000	<<locked>>	61%	43323	77%	**06	100%
Accurate Solo 1250	<<locked>>	61%	43613	77%	**29	100%
Alliant 2400	<<locked>>	61%	44585	79%	**72	98%
Alliant BLUE DOT	<<locked>>	61%	39726	70%	**50	100%
Baschieri & Pellagri 100	<<locked>>	61%	44338	78%	**06	100%
Hodgdon Clays	<<locked>>	61%	39117	69%	**04	100%
[Hodgdon H110]*	<<locked>>	61%	37434	66%	**17	89%
Hodgdon LilGun	<<locked>>	61%	38464	68%	**37	95%
Hodgdon TrailBoss	<<locked>>	61%	16302	29%	**4	100%
Maxam CSB 1	<<locked>>	61%	41553	73%	**03	100%
Maxam CSB 2	<<locked>>	61%	46093	81%	**49	100%
Maxam CSB 3	<<locked>>	61%	42917	76%	**03	100%
Maxam CSB 4	<<locked>>	61%	44048	78%	**22	100%
Maxam CSB 5	<<locked>>	61%	44324	78%	**99	100%
Ramshot Enforcer	<<locked>>	61%	45121	80%	**68	99%
ReloadSwiss RS 14	<<locked>>	61%	16230	29%	**04	100%
[ReloadSwiss RS 30]*	<<locked>>	61%	24381	43%	**68	82%
SNPE Vectan A0	<<locked>>	61%	42960	76%	**55	100%
SNPE Vectan BA 9	<<locked>>	61%	47529	84%	**04	100%
SNPE Vectan BA10	<<locked>>	61%	41843	74%	**47	100%
SNPE Vectan BA6 1/2	<<locked>>	61%	23598	42%	**25	90%
SNPE Vectan BA7 1/2	<<locked>>	61%	42192	75%	**04	100%
SNPE Vectan BA9 1/2	<<locked>>	61%	47340	84%	**85	100%
Somchem MS200	<<locked>>	61%	47224	83%	**31	100%
[Somchem S265]*	<<locked>>	61%	29037	51%	**47	84%
Vihtavuori 3N38	<<locked>>	61%	43381	77%	**83	100%
Vihtavuori N105	<<locked>>	61%	41423	73%	**54	100%
Vihtavuori N110	<<locked>>	61%	29225	52%	**63	91%
Vihtavuori N320	<<locked>>	61%	48109	85%	**65	100%
Vihtavuori N32C Tin Star	<<locked>>	61%	29022	51%	**30	100%
Vihtavuori N350	<<locked>>	61%	46891	83%	**70	100%
[Winchester 296]*	<<locked>>	61%	38624	68%	**67	86%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data